Search results

So no 4 wheels bikes and as heavy as possible bike wheels? Hanebrink bike is my only option?

What about something like that?Rhoades Car Sportped Electric Quadracycle | eBay Is it still subject to license and interpretation?

You mean fat tyre like this?

Any way I can carry someone properly on a bicycle, or shall I resign to a moped or a small car? :(

how come it works so well on moped to carry a passenger, and with a bike, even with a long tail like the xtracycle handling becomes so difficult??? So I can't carry people with me on my bike? :(

Ok, I managed to carry 2 different passenger on my bike. Here is what it looks like now: At first, when they see the seat, they are not really convinced about it, but once they get on the seat they get quite happy about it. I managed to bring a girl to a restaurant (6km distance) and...

about 100gbp per spot welder and 40gbp customs. 2 times :(

I did not solder them. I used a cheap chinese spot welder. I had to buy 2 to have one working. Be careful with aliexpress they side with seller when you'll have your spot welder which may fail. I'd like to get a better one, the welding isn't that nice. But I can't afford 1000gbp to get a...

no, but I'm going to run the bosch on 16s (65V fully charged :p) Everything is inside the box, for a total of 80 cells (648wh) + controller: Tracking power: I don't have a power plug yet.. so there is a hole :rolleyes: Now the only issue is to find a way to fix the seat properly to the...

I was supposed to receive my motor yesterday, but ups never shown and now says I'll receive on tuesday 1900..... So yeah, I wanted to install it quickly so hence on the bosch. And yes I'm overvolting it to 48V :)

I tried to install the bike seat on the bosch sinus B3 and it was a miserable failure: The axle were to short in order to be tightened properly. I decided to remove the torque arm in order to do that but then I had chain issue.... Make sure your axle is long enough to allow foot peg (very...

On the picture 50 cells. So at 8.1wh/ cell it's a 405wh pack. My final pack should have about 100 cells. So a 800wh pack in this box :)

Yes makes sense dave. I chatted with the seller and he insisted to try it first with the initial setting. It may be loose enough to allow suspension to work. I'll try that first then :) I also started to put batteries inside the seat :) These battery holder are not bad to assemble DIY pack...

Yeah, I'm hoping to make it work. I'm thinking to bolt the seat on the rear fork area to still have rear suspension working: What do you think of this configuration?

Picture on a bike:

The bike seat cost shipped 200USD. With about 35euro customs, it cost me a total of about 150GBP. A bit expensive... but this seat has room for a good battery pack. I calculated that I can have 9 cell on width and 13 cells length. So if I do an 18s configuration I can have a total of 18s *...

Hey guys, I finally got my hand on the bike seat. I decided to try to on one of my bikes. Currently it would be my Dahon jetstream: Here are the pictures:

until we got our pavement covered, we need full enclosed bikes! Something like this but lighter: C-1 fully-enclosed self-balancing motorcycle - YouTube

yup thanks. Too bad they don't have bigger enclosure, I need at least double capacity with my bike power :/