Search results

They have the 74mm motor: Crystalyte Europe :: Motors :: G series Crystalyte motor :: G series motor front dropout 74mm Last time I contacted them they planned to have a kit for brompton for the g209. Not sure now if they are still planning that. Otherwise it's still possible to lace the...

This is a rebranded conhismotor bike: http://conhismotor.com/ProductShow.asp?id=208 With a premium on the price lol

Tillson, yeah I'm looking for the 2 amber light I can put on the side of my bike. Something visible but not using much space on my bike :) Shemozzle, I've already purchased this light set. But the controller box is big and the light.. not that bright. I'm trying to find a more customizable...

I have a 12V DC-DC converter? would that work on this bike? Ideally I'm looking for: - A flashing red light - A red brake light that appears when I brake - And a left and right warning light. Still wondering on the way I can achieve that lol

Yeah, don't know if it would fit the rear motor. But actually I don't mind widening the brompton rear dropout to fit the motor I like. I did that (thanks to john) with my actual brompton (up to 145mm) and I don't have problem folding the bike.

Yeah, the Cree light are the most visible amonst most light. I have cree led light now too, but I'm tired of replacing the batteries. I'm trying to find a way to avoid that (either by using my bike main battery or via dynamo)

I've been in contact with crystalyte europe few months ago about the G209 motor. Apparently they may have a version of the motor that would be "plug and play" with the brompton front fork. (right shaft diameter) However, this motor is still at 4kg, is laced radially (so you need to unlace the...

Thanks KirstinS. I was also wondering about the brightness of these friction free light. I think I better go with some that are battery powered :)

Hello there, I've found these dynamo light: REELIGHT SL520 REAR BIKE LIGHT WITH BACK UP FUNCTION DYNAMO LIGHT | eBay So I can have my light without even using the batteries. Isn't that a nice thing to have?

Thanks for your answer rog. I purchased the converter, will use it for my bike :)

I'm thinking about using high density led as light: HobbyKing R/C Hobby Store : High Density R/C LED Flexible Strip-Yellow (1mtr) So no one will steal that :)

That's what I'm doing now, but I'm sick of removing my light every time I park my bike. Also, I always forget to charge my light batteries and they are often out of light. So I prefer to directly integrate that with my bike.

Are DC-DC converter using a lot of power? Hello there, I've found a DC-DC converter for my 74V lipo: Zenid e-Bike Parts I'd like to use it so my battery can also be used for my lights. It has 90% efficiency. I'm wondering if I plug that with my batteries if that may uses a lot of my...

I wouldn't trust what they say. Look at their ebay rating: 94.9%. It's very low for an ebay seller. They claimed 1000 cycles on my LiMn2O4 36V10AH battery and I've lost 40% of the battery capacity in 6 months with 100 cycles... And I didn't get any replacement as it's supposed to be "normal"

Thanks. Is this one the right sealant? PRO SEAL RTV Silicone Instant Gasket RED 85g Hi-Temp sealant | eBay

Ok, will try to cover the metal to the maxium. Maybe the sillicone can work if it's already used on controller wires.

Actually, I've also seen this sort of "silicone sealant" on my controller cables exit. Both on the Hua tong one and the Infineon. This item specify it's a sealant for cable: BURST BRICK BLAST CABLE COVER WALL HOLE PLATE WHITE WITH SILICONE SEALANT | eBay And cables are also made of silicone...

Thanks guys, going to get Araldite then :)

My battery keep loosing its capacity. I'm around 210-220wh max for a 360Wh battery (36V10AH) So I only have about 60% of the battery total capacity after 6 months... Li(NiCoMn)O2 chemistry from conhismotor definitely doesn't worth it... :(

Thanks Wurly. Is araldite are a good seal like the silicone gel? I think I've found the right connectors finally: eBay - The UK's Online Marketplace They are made for AXT power supply that can handle 1000W and more. That should be able to handle high current :)