Search results

Thank you ,i will try if needed i will use a soldering iron and warm it up .

I didnt have time to put the motor back together yesterday but will saturday .Then test it .If the controller is broken.Is removing the potting a viable option to make repairs ?I would rather repair Than by a new one .Ideally make the controller better with better grade parts .

Does this look ok? I have double heat shrinked the cables now .

ive stripped down the motor and checked the nylon gear which all looks good .The 3 main cables have nicks in the sheathing,im hoping that one of them is giving me my problems.If its not it is either the controller or maybe the gear the clutch sits in .I may have caused the cable issues when i...

Ok i forgot to mention when the bike is on a stand and im cycling through the gears it works fine. My problem is when i sit on the bike and put pressure through the peddles thats when i have problems .Thats what made me feel like it was the clutch. I will strip it down and have a look this weekend .

Can they be tested in the controller via the cables or do i need to remove the potting compound

Ok .

Not yet ,I'm trying to think ahead i need the bike I'm guessing there not an expensive part .

My mosfets maybe knackered can you recommend me some please.Just incase and how many do i need.The battery is 52 volt 72 ah if that matters . Cheers

Im ok with a soldering iron are replacing the mosfets easy to do. I have read the ones that come from the factory aint great.Is it worth changing them whilst im in there ?

Wicked thank you,i didn't think of that because i thought they would be too tight .

I am having an issue with my HD and want to strip it down. I thought it was the clutch but replaced and still have the same problem ,I an looking for the tool that allows me to remove the main spindle .I believe there are 2 locking nuts holding it in place . What's happening is when i change...

Thank you very much,i have ordered one.Just been out on my racing bike with no motor and dont like it haha

Thank you no its not ,mine has spline fitting .

Has anybody got one of these in stock please, im struggling to find one in the UK . Cheers

I have bought the spyder and chain ring,my issue now is the chain line is way out .So when im in the lowest gear the chain comes of the chain ring.Are there chain rings that are set back the same as a bling ring ? If no can i set my rear cassette up so that instead of 8 gears i only use 3.I mean...

Thank you .

I have put the bafang chain ring on but i need a new chain i believe as I've tested it .So i cant really judge the Bafang chain ring ,but it dont look great.I was looking as this as i have stripped my threads on the one crank arm would it be suitable ...

Thank you both .Do you think using an adapter with a separate ring is a better option ,I do 30 mile a day and my bike goes through parts like nobodies business . Could you recommend a ring to go with the adapter please ?

My Lekkie Bling ring has broken 3 teeth, my question is i have seen that you can buy an adapter and fit different rings .Is that correct ? I cant complain the bike had done a few thousand miles .Is there a cheaper way of replacing the chainring as the lekkie is expsensive . Happy Easter Mick