Search results

You don't have to click the thread if you don't want to read about it ;-) Most those owners take the time to express their triumphs on these bikes. I quite like reading about their adventures. Sometimes Lynda's punctuality on the forum hurts my eyes. However I am no better.

Whats the current speed you travel at? I think on my ebike I have the 44 or 48 front with a 14-?? not sure what the top is and I can just about be comfortable at 25mph ish. Unassisted I actually use the same front but a higher geared rear of 11 teeth. So if i put enough effort in down a...

Brilliant, you never cease to amaze me how many little accidents or funny things you do. Brilliant!

Even on 15s lipo this is going to give you a max rpm of 600 (about 30 ish mph in a 20inch wheel). Which is going to be spinning the wheel fast. To the point where to get smoother running it will be best to use Hall sensors on the cheaper controllers. Even then you run the risk of melting...

Living on the edge flecc!

Poor cwah, it's the need to have every thing in one package. It's hard to get everything you want in one bike. It's no ones fault. It's just the way it is. You can only get closer to it. I do worry about small wheeled bikes doing 30mph. That speed is fast enough on my 28inch wheeled bike. It's...

I know you'd be amased what I manage with in a small apartment. I have various other tools and weird things in storage. Which is a right pain. Fortunatly electric gear has mostly forced me to buy new things which i've never had before. Maybe I'll just buy one and give it a go. I thought at...

If I had to do it my self I think i'd just buy a small hacksaw and cut through it to remove it. That would seem like the easiest way if i couldn't knock it out. Or angle grind it down, but that would probably be a bit aggressive.

It's fine my motor is ok. Gears, clutch windings all perfect. Dirty and messy but working none the less. So all yours if you like.

The engineering firm will take it off or chisel it out. If I had a vice and anfew of those tools I would. But as I live in apartment all my bigger tools are at my old house. So it just have to make do with the basics then pay someone else to do the harder stuff. It's a bit rubbish but it's all...

Bearing Sizes for the Bafang BPM Rear Driving Motor :- RHS Bearing (As you look at the front of the bike fitted) FREE WHEEL SIDE 6810RS (50mm id, 65mm od, 7mm wide) LHS Bearing (As you look at the front of the bike fitted) BRAKE DISK SIDE 6904RS (20x37x9mm)

Hopefully it won't be like mine ;-) With a small swimming pool inside!

Probably close to 4000 to be honest. It's not dead, I've not binned it. Its going down to the engineering firm to have the old bearing removed or if it doesn't move skimmed off. I will then change the bearings within the motor including the on the motor fits too as well as the axel ones to...

I can do a video for you on the bpm but it may not be the same as your exact motor.

I have the worlds shittest ebike. Here is is....

I'd like to go even if it means catching a train and cycling.

Ha brilliant. There's always someone out there creating wacky stuff.

Already past the getting rained on average this year. So far I've been rained on 22 times. Clocked up 5 times over the last two weeks. It's been pants but the correct clothing has helped. Nice thread. Glad I've had the motor the last week. Now it's dead for a bit I might just get a sail.

Unfortunately not, couldn't see any numbers as it had rusted through and Broken up. Might just give it a rinse with petrol on various parts and then pack it with more grease once I get the new bearings. Inner race will be the size of that ring on the second to last picture. While the outer...