Search results

9. Some of the high-profile child sexual exploitation prosecutions have involved groups of South Asian males. There has been heated and often polarised debate about whether there is any link between ethnicity and group-based child sexual exploitation. Poor data collection on the ethnicity of...

Child sexual exploitation by organised networks

One of the factors that caused problems was the prosecutor had a number of tests that they used in grooming cases to determine the credibility of the victim as a witness 1) when the person came forward, 2) whether they have been consistent, 3) whether they have given one account and not...

OK - so you are going to get the motor out of the 26" wheel and then build a 20" wheel ? There will be somewhere to set the wheel size in the LCD but the motor will have a maximum rpm that may be too slow for a 20" wheel. e.g if the maximum unloaded speed on a 26" wheel was 19.5 mph it would...

I found this interesting - Oral evidence from Nazir Afzal to the House of Commons Home Affairs committee https://publications.parliament.uk/pa/cm201213/cmselect/cmhaff/494/121113.htm

https://www.pedelecs.co.uk/forum/threads/upgrading-a-carrera-vengeance-e-spec-what-options-do-i-have.40745/

Yeah, I had a look at that one, that looks like it should work with v brakes but I couldn't find it it in the specs

Looks ok, if you want to be careful take a photo of your existing connector and send it to the seller to double check or ask them to send a photo of the connector I think it says it supports v brakes in the description but I'm not sure what language it is in

Theres loads on Amazon and eBay, just look for an e-bike front conversion kit for 20" wheel that supports rim brakes, check fork size, motor connector.

There's loads of 20" Ebike kits on eBay for £150, so you could buy one of those and just use the motor wheel, just check the motor connector and fork size

I see it rather differently, employers are relying on the government to "top up" uneconomic wages

@saneagle linked to one here https://www.pedelecs.co.uk/forum/threads/need-new-front-wheel-with-motor.48215/post-734410 Any questions ask here before you order

What the 2.5 million of them that are working more than the the minimum number of hours to qualify for AET ?

Ok, if it is a 20" wheel, then you probably need a 328rpm motor if you go for a replacement wheel

Is there any markings on the motor ? Just need to be careful on the motor speed - what's the top speed at the minute ?

There's loads, Ali express , eBay Amazon, front hub wheel 20" (or 24") 36v motor. Following the cable back from the motor is there a connector ? Can you unplug and take a photo of bothe ends ?

Yes Might be cheaper to buy one pre built, but maybe worth asking All these mention wheel building, but most bike shops do https://www.wight-mountain.co.uk/ https://tavcycles.co.uk/workshop/ https://www.adriansbikeshop.com/about

ok

I think any hill of 10% gradient, sustained for a few hundred yards, counts as a "big hill" !

The great thing about having more than one is you can be working on one, waiting for parts etc and still have a spare