Search results

Only just saw this Replacement board Looks like best option but it’s not got R1 and R2. So are you sure ? I want to emphasise all this stuff is not my thing but I’m sure I could replace the old board with this if it’s correct . Does the board plug in or is it soldered in ? And I haven’t got a...

Yes you mentioned that in earlier post so Thanks for that . Now the R1 which is the original component how do I tell if it’s a resisitorbor a capacitor

Thanks. Please Remember I had an enthusiastic guy who told me he knew what he was doing meddling with this . So here’s the complication . 1. the 3 sensors are not the original ones . He fitted type 49e. He guessed this . He didn’t know whatvthe original ones were and worse still he didn’t even...

Maybe this daylight photo clearer

3 blue are sensors . 2 yellow are resistors. Right hand resistor was dead . For some Unknown reason he tried a Capacitor on it . The 3 sensors He put on on are 49E .. Without even checking what originals were or if tHey were faulty In the first place

The wiring was checked but I’ll double check . But really hoping I can find a local member who can look at it Thanks Mike

Anybody in NW England who could look at this wheel motor attached to Giant Suede? Basically was working great until wheel came off front forks. cable in seems ok . One resistor I think blown . Th it somebody to look but they’re not bike expert . If not in north west I do travel with my job so...

Ah ok . I’ll post it when I get home . Didn’t think was necessary as the existing photo shows 2 resistors

Ok thanks well if you look back at the photo I’ve got 2 resistors on the circuit one of which is faulty so I guess I can’t use ss41. Anyway I need to pass it to somebody cos I’m not able to do these repairs Thanks

Can I just clarify with you . Are you saying that ss41 can be used on a circuit that has no resistors ? Or are you saying that ss41 can be used on a circuit they has resistors But it bypasses them ?

Wellthanks again but as I said it’s a bit beyond me to try and REsolve myself I’ll need someone Like you who knows what they’re Doing to look at it . (Only thing is the board has 2 resistors R1 and faulty R2 so surely the original sensors would have been a type that relied on resistors )

Thanks again . I’ll try to see if I can do the tests From the battery terminals as you suggested and check the value of the other working resistor. but Unfortunately it’s Really all a bit beyond my capability . From what he has told me, from what you say , and from what I have deduced , 1. the...

I can’t believe this guy who pretended he knew what he was doing . 1. He replaced sensors without knowing if they were Faulty And threw away originals . He fitted ...49E A0073 hall sensor's are supplied by ReefLED can be used for a variety of DIY applications. Are these correct ones ? Model...

Thank you I’ll check

Any body any experience of this problem please and likely ways to solve/ remove this creaking noise bearing in mind the lafree motor is in the crankcase Thanks

Update . I’m collecting bike from this guy tomorrow . He tried a 47k resistor and nothing . So I will try to do the tests that you advised myself over the next week

Sorry that may not be clear but I meant I travel with my job so I could probably drop it off at some stage if I have no success With this guy . That is if you’re not close to Warrington

Didn’t notice that I’m in warrington but I travel around country