Search results

Setup problems: 1) Gears need tweaking 2) Front brake is making one hell of a rattle noise when not applied and is binding slightly Nothing unexpected really. I will post up a video on my next ride, once I've sorted out the setup. My gears needed a tweak also the front and rear brakes as...

When my bike arrived the back wheel was like an egg, so out of round/buckled, Greenway offered replacement immediately, and remarked if any other problems that I don't hesitate to contact them, they will do their upmost to sort any issues. I had my wheel trued by local cycle shop for a fiver ...

Wow what have we started Cyclebuddy, they sellin like hot cakes, And That's a neat picture Brightonebikes, lookin a bit windswept ,and good honest review there, The bike started out at £1400 so we've not done too bad Brightonebikes you delved into the motor settings , can you change the keep...

Going from 250w to 350w is by way of programming as per endless sphere quote... , increasing the power output to 350 should be doable by increasing "keep current" from 30% to 42%. Controller can take 48v it's just that it's 36v to make it legal ,48v ups cadence and speed above the legal limit...

Have you been out to play on the Greenway yet Redcup? I know the weather is pretty awful. You'll have to update us with your views of the bike,vids etc. As soon as you get out there.

Never mind the square or Isis, I remember bashing cotter pins in with a hammer to hold the crank arms,then the pins were threaded for a nut to go on the end to hold em in, as well as seeing folk going down the road with a loose one haha like a wooden leg going clunk.

If you are down the smoke call in to greenway and check out the max drive bike in commuter style or cross city style, no drag from hub if u run out of juice as it's mid drive, 10 minute walk from Beckton Stn http://greenwaycycles.co.uk/electric/14-greenway.html Just my ten pence worth , it'll...

The Max Drive unit uses square taper crankset, the spider locates on the freewheel drive section by way of spline drive only looking similar to Isis, but secured by a heavy duty circlip,

Shipping costs are quite amusing, did they throw it out the back of a plane as they passed over?

Number 4 the speed sensor is close to the tyre, that's the one I mentioned I had to cable tie as the fixed cable position is in poor location. Hope weather picks up over next few days so you can have a little fun

You can try cycling the battery a few times to maybe improve the balance, fully charged to empty,straight on the charger again fully charge,repeat a few times see if there is improvement, if it's still really poor ,recycle bin time and get a new one, or get new one built into your shell.

Greenway bike code on the box is indeed goldenwheel http://www.goldenwheelgroup.com/eng/Product_Show.asp?id=3402 And I partiularly like the e totem Woosh get them in stock for this season

Yes Greenway must have cut an unbelievable deal with the courier company they use , £9 delivery from London to Coventry with a 20kilo box 5'X3'x1' a van does say 25 to gallon a lorry 6 to 8 to gallon , the courier defo had his pants pulled down on that deal., or its subsidised by seller...

Good idea woosh, certainly there is a market for independents to get involved in building specialised bikes , you could do with Evans cycles to get onboard and sell a few to them in form of built bikes, as long as you take warranty claims onboard you would be ok, Evans dealt with Tern cycles...

Good and informative Cyclebuddy, The price has fallen in the Greenway Max Dive not due to lack of demand for the product , it's down to their poor marketing it's listed everywhere as a mid drive bike, eBay local ads, gumtree etc. Not selling because buyers have no idea what it is, picture...

I reckon it will fit in same mounting, they like to make things simple and cost effective, it'll be a monster, not sure whether they have started production run yet,

Came with a 38t and 9 gears on the rear, I have a 44t from my MTB that I had knocking about that I tried and was pretty pleased with, now trying the 48t , notice the 38t behind the 48,

The motor is detailed 36v 250w 14a, Bafang website lists that as the mm33.250 but looking at motor number on this greenway it is the 33.350 , this is listed in components section of Bafang website , the kit lists a 33.250 only , so they must of supplied the manufacturer with motors...

Linky for "chain-glider"please anotherkiwi as I've not heard of them, I'm sure special tool not required for spider refitting, it's just a way of expanding circlip to go over the splines, and these greenway come with the 33.350 not the 33.250 motor so take 36.43,48v and at 48v will run 350w...