Search results

  1. billyboya

    brakes

    Hi all Im fitting new disc brakes on my bike the brakes are called Bolids. But I removed a lot of things from brakes to clean them up. But I now have a problem with a part which i have uploaded images below. it has 3 ball bearings inside plus a plate, But I can't remember now if...
  2. billyboya

    Help on wires on a PAS sensor

    Hi all Can anyone tell me what colour wires does a SM PAS plug sensor has, so I can join a WP-90CM orange julet plug instead like what colours from the WP-90CM orange julet plug join to SM black plug
  3. billyboya

    wrong pas sensor

    Hi all I ordered a pas sensor with the orange 3 pin connecter juliet I think it's called , but got sent a SM black plug type This is the one i need above It cost £7.92 but now seller says how about a £4 refund and a 8% voucher. I am so angry as I said to him no as I...
  4. billyboya

    Pedal assist disc help. Plus received wrong sensor

    Hi all I've got a 12 magnet disc for my PAS i've taken it off bike to clean the disc but which is the correct side to face the crank is it image A or Image B below as forgot what way it was now dam appreciate any help thank you ok I've sorted it side B
  5. billyboya

    delete this post

    HI all Can anyone suggest a good battery charger, for my bike, its a 36v2a charger I need with a fused plug, and a jack plug (yellow) on charging end. the battery is 36v on bike. I have a charger atm but the plug isnt fused, plus charger seems faulty as green light dont always come...
  6. billyboya

    charging a battery help

    I have a 36 volt battery on my bike, and to be fully charged I was told it has to be 42 volts. but its now at 42.3 volts and still no green light, would this have to be more charged then than 42 volts, I have tried shaking the wires to plug and also to battery but nothing yet like a green...
  7. billyboya

    help on buying brake pads

    Hi all I need some info on buying new brake pads for my bike. I have enclosed images below, But cant seem to find the same ones. any help plus a web link would be most appreciated
  8. billyboya

    nut size

    I purchased this bottom bracket tool, but dont seem to have a spanner or socket bit to fit in the end. would anyone here know what size spanner or socket male end to fit in end of it
  9. billyboya

    bike battery no green light

    I have a 36 volt battery, and to be fully charged it has to say on multimeter 42 Volts which it does, well actuially its now at 42.1 volts but still green light on charger dont come on to say its done only has red light still and charging
  10. billyboya

    pedal help

    Hi all I had fitted a while back a pedal assist disc to my pedal shaft. but only have now noticed, that the pedal arm now seems to wobble, reason being, is because the disc isnt flush to end of pedal shaft, but if you look at pictures, I cant have disc fully to back of pedal shaft as it needs...
  11. billyboya

    walk assist mode

    I have the same G51 display on my bike, But i was told to have walk assist mode on, you have to hold down minus key then keep your finger on the minus key and walk with bike, which to me seems very awkward, But on this youtube video he just holds minus key for 3 secs lets go of key then just...
  12. billyboya

    brake adjustment help

    I think I have or maybe adjusted my front brake on my bike wrong, as now its worst than before i did it. I have enclosed 2 images. I did move the part in yelloow box up higher. I think maybe it should have been towards floor
  13. billyboya

    a question on walk mode

    On walk mode how comes you need to hold down the button whilst trying to walk with bike. just seems a bit silly and awkward, why cant you just click the walk mode button then take finger off then walk, why do you have to hold button all the time. it would make it much easier if you didnt have...
  14. billyboya

    controller box loose

    Hi all I have a controller inside a box called HOSH. as in photo below, but the brackets have snapped, so its only being held onto seat post with Velcro tape, i was thinking of securing it with round metal worm drive clips. below which says 140mm to 160mm would they be big enough...
  15. billyboya

    G51 controller ( Pedal Assist not working )

    my pedal assist has stopped working, would anyone have any ideas, what to check for. I know its down at the pedals the wire seems ok, but have not as yet removed to check, I have a slight feeling I may have turned it off by mistake in the G51 display settings but cant remember what setting it...
  16. billyboya

    charging up battery

    Hi I have a 36V lithuim Battery and to be fully charged it has to go up to about 42V, I tend to keep charging it up after every trip, like today I checked voltage and it says 39V so only used 3V is it right or wrong to keep charging after every trip. even a small journey
  17. billyboya

    bike mirrors

    Hi all just wondering why every wing mirror I use on my bike I can never get to see whats behind properly, as for the left one its a waste of time, and my main right mirror all I can see is my arm. I have to place my arm on middle of handel bars to then see whats behind, I have adjusted it many...
  18. billyboya

    PAS not working

    Hi all I don't really know why my PAS isn't working, as it was sunday, but I have tried al help on youtube, I have a G51 Controller but it only goes up to Program 16 I have seen a lot on youtube goes up to 18 on program 10 it says driving mode 0 = pas only 1 = throttle 2 = Pas + Throttle...
  19. billyboya

    Testing a battery

    Hi all How do I test my battery for how much charge it has whilst its off the bike. as on the back there are 2 x minus - and 2 x plus symbols + if you zoom in you can see them its a 36V 13Ah down tube type...
  20. billyboya

    suitable wing mirrors

    can anyone give me some advise on whats best wing mirrors to put on a bike. I would prefer ones what extend from the handlebar grips. But only problem with that is I have this electric bike and it has a throttle grip on right so no way can I have mirrors what extend from the grips unless you...