Search results

Me too, I have an inbred and Pompetamine and many other bits But I live in Brighton so am very excited to go to Sheffield with work. Side trip to their warehouse coming on in May Very nearly bought a original scandium scandal frame the other day. Too big,

Checkout banggood.com Great website with good pieces and service Used them many many times for leds and lights

I put those bars on everything I own. My commuter, My hardtail...everything except my drop bar roadie There are the most amazingly versatile comfortable things! Folk tend to scoff especially mtb -ers.....till they try :) the geometry is spot on and are ergonomically perfect, even on technical...

My own view based on your brief spec would be a 250w bafang crank drive conversion. Done by a pro if not happy doing yourself I But only if you have a 68mm bottom bracket. Which there is an excellent chaonce you do Hubs don't like being banged about too much. A full suss bike lends itself...

Great ! Have fun :)

Advert is very unclear but I don't think there is any protection /BMS Just a xt60 output and no jst balance leads So your house may well burn down. Google lithium battery fires and see how serious .... But also the 4400 ah rating (if true) will not get you very far at all There are no truly...

And, for completeness I did test another throttle beforehand and check phases (though not inside controller on.pcb tracks) I now solder all connections direct including phases since I've had previous issues there And the thread ends on a happy note Thanks, as ever , for time and input folks

So, that was the issue Dodgy/broken weld on cell pack due to bump So convinced was I that issue was controller I bought one I don't want ! And an LED Grrr But, very grateful a new battery isn't required , everyone needs a spare controller (although I have at least 4 now - but only one 48v)

Update , after Woosh post i feared theb worst But then I recalled the intermittent nature of fault Opened up battery... Two bad welds with flappy nickel strip, see photo I've lifted for photo but must have been connecting /disconnecting to give intermittent fault

Thanks, I've set this evening aside to diagnose /dismantle I do have a spare bms for this case

Ok, I finally gave up and ordered a new controller Solved ...or so I thought. Turns out my main Jimmy at insat battery is on the blink. I reckon there must be a loose connection somwhere . It's reading low at output (around 35v) but won't charge Given the sudden failure over a bump im...

Please don't make this post any worse, there is another thread to pointlessly argue the stupid and inevitable !! Apologies , no dig at you, just grumpy

Bust commuter bike....can't find fault Bust haedtail. Seatpost broken and front wheel bent Picked up my non electric road bike ....slashed tire (very odd as in my shed,- think a small scratch must have popped when the sun superheated the shed) Whinge over

So my commuter with a front BPM hub, 48v controller and battery just cut out on way home Wednesday Small bump /pothole and stop But, and this is the odd bit for me, I have power to LED panel and the throttle provides momentary and weak power before cut out.....then nothing I've checked the...

That pink suit is priceless ! I have a down hill helmet which works well or I use a winter neck warmer /buff A. summer neckwamrer made of a light , wicking fabric would be great ...i have never found one I have a dodgy nose which means I am a bit of a mouth breather when exercising, flies...

And my bike died on way home. Sods law Got power to led and throttle gives a moment of weak power to motor at start then cuts out I'll diagnose issue tonight (starting with putting an old but working collar throttle on)

Been using the suggested wuxing and very happy with it thus far. I'll update this post with a longevity report in 6 months time!