Search results

Hi.Wheel of ground runs fine.wheel on ground blows fuse.could the ratio have anything to with this,changed from belt drive to chain drive,gone from 11/1 to 3.4 /1 ratio.Motor RPM 4450,is the RPM to high. HELP.John

Hi.Can you run a 36v Hub Motor at 24v,what will the effect be.John

Hi.When i lift the drive whell of the ground the motor go OK.when under load the Fuse blows.this a Trike.4 batteries wired in Series & Parallel.Changed it from belt to chain drive,Ratio 38/11=3.4 Ratio,Seems to have a lot of speed with the back wheel of the ground,do you think the Ratio is to...

Hi All.Am changing from belt drive to chain drive.belt ratio 11/1,chain ratio 4.2/1.will this work.John

Hi.Flecc.can you help with this one.Where do you wire the charger plug. 4 12v batteries wired series and parallel. John

Hi. Just rewired my trike.4 12v batteries in series and parallel.where do i wire the charger plug.John

Hi. I bought a GT Rider about 2 years ago,done about 1500 miles.the seat tube broke.so i phoned 50 cycle and told them about it.they emaild me back and asked for a picture,so i sent them one,they emaild me back and said i had the the seat post to far out, which caused it to crack.they said it...

Hi All. So nobody knows about Controllers for electric bikes.so does anybody know where i might find out about them. john

Hi All.How do you work out the size of controller you need.I need a new one for a trike, 24 volt 4 batteries 380 motor,what ampage controller will i need. thanks for any help given. John

Hi all. Anybody got a Powabyke/Tryke. What i need to know is,what is the round silver thing next to the fuse holder on the battery box. do i need it when i build a smaller battery box. John

Hi all.Any body got a Powerbyke/tryke.What i need to know is,what is the round silver thing next to the fuse holder on the battery box , do i need it if i build the batteries into a smaller box. john

hi all.can you enter a electric trike.also do pay on the day to enter,or do you pay in advance. john

hi all.useing 6 12v 15amp sla batterys to give me 36v 45amps.do i need a Thermister,if so where do i wire it,also where do i wire a fuse,will a 36v 1.8amp charger charge the pack alright.john

Hi Flec. Thanks for the reply about the E-Go kit,what about the Cyclone kit, or can you recommend any other kit,it`s for a Powatryke as i find it well underpowered. john

Hi All. Has anybody used a E-Go nano kit, i was thinking of useing one on a trike. john

Hi all. i have a Powatryke with 12v 15amp batteries, i want to change to 35amp batteries to give me more range,will i have to change anything else, also the motor cuts out at 12 mph,is there any way to change it so it dos`nt cut out thanks fo any hep given. John

hi all.have a powatryke with a 200w motor.also have a ezee rider electric bike.i would like to put a 250w motor like the one in the ezee in the tryke,will i have to change the controler to.anybody know how much the motor is.or just change the controler in the tryke.i changed the 180w motor for...

hi all. i have a 180w 36v electric hub motor from a powatryke which i want to have built in to a mountaing bike front wheel.whate`s the best controler to use,hope to use NiMi batteries to save weight,thanks for any help givin.john