Search results

The lcd3 I just fitted had a separate wired 3 button switch, it only has a short wire to fit on handlebars next to display, I had to extend it to fit between the display on the bent boom and the handlebars.

I have a tandem bent, finally found a round tuit to get it sorted, it has an old crystalyte 400 series dd front hub, I've just fitted a new KT controller and display, the up, on/off, down switch wire had to be extended to fit on the handlebars. I soldered the wires with small heat shrink on each...

Welded, not, brazed, a bit of 25 x 5 flat bar with a bit of 12 x 3 flat br for the little cup. I have an ancient sip stick welder, I must have had it for 40 years. It's just a big transformer, nothing to go wrong now the broken switch has been bypassed , just plug it in.

Re the tow hitch dropping down under load, I adapted mine with a brace, posted it before but can't find it. There's a bit of webbing in the cup that fits under frame to stop scratching.

It It's still working fine. Do you want me to find the link? Problematic at moment, away on narrowboat with very poor signal.

Which smart Alec is going to get the Bulls Eye?

We can see through their game!

Shattering news!

Pair of zefal doobacks on mine, I find them both useful at times.

My life history would be far more exciting I can assure you, even the censored version without the pictures! The controller is ancient, has a Dutch label on it. Kit may well be around 2010. DD motor works on the throttle, pedal assist doesn't work. Can a throttle be fitted to a KT...

Bump!

the small magnets are glued to the lever, there is an adjustment screw underneath, can't use that now. The sensor is glued to the body, there's a 1mm gap between them.

Just think of the surface area that could be covered with solar...

It's to be hoped he doesn't upset a badger by riding furiously.

@matthewslack is this you? :D

I fitted sensors and magnets to my magura levers, they had sticky pads on but I used super glue at well, they haven't come off yet. If it's a rounded surface use a little bicarb of soda at a filler with the superglue.

I started to use the Speeed Android App on my phone, works a treat, though I did have to buy an new cable, the one I've been using for a while didn't work.

Hi all, Finally got round to sorting out my recumbent tandem. It's got a Crystalyte 408 Journey 36v 20a front hub motor. It had been cutting out, a switch off and on cured it. I found that the 3 Anderson connectors on the phase wires had been smashed and held back together with tape! I've now...

Ok, hadn't seen it till it came up on FB today.

https://widepathcamper.com/