Search results

Some one has a cushy job at that council drawing lines, I bet they are finished by lunch and playing COD by 1pm. Our council has an online reporting system via a sign up or not portal, it's not great but better than nowt, the last request I put in took 6 months to fix. One during Covid took a...

Have you tried c5 = 8 or 9, maybe try and aim for 15a, 14a was fast enough for me on flats, the YOSE motor had a better top speed but the MXUS is quick to draw. Is it square wave or sine? I felt that square was crunchy but not in a quantifiable or easily describable fashion. I used a 14a...

Yep first world problems I guess. Tbf I don't think I am going to play CP2077 much, far too much razzle dazzle, hurts my eyes even with lens flare, motion blur etc set to off. Indeed the days of scraping as much base K together to get the sound blaster & the mouse to function in Doom & Rise of...

last look £16 for the I7 & a few quid coins for the RAM if they would buy it I was told. To case it & SSD it would cost too much to build n sell, if it sold at all. I put in on ebay spares faulty but working. It is, I think its an age + eye sight thing, I just started cyberpunk 2077 although...

Some of these vids, are worth the time watching, even though, not like for like motors etc but there maybe a few tips and tricks to pick up on. Or do a me and have a spare motor. I did that Dillenger cable in at the axle, after the hall sensor fix I did. The Yose was wear at the top of the forks.

One assumes you found this vid... GRIN cable replacement Not for the faint of heart. Check all of the cable length, I had a slight wear on my long YOSE cable which exposed inner wire. Once inside the motor check the hall sensor placements and connections.

Haven't even touched a Mac since 1995/6.

Windows 11 will be gone soon... As @guerney says, work around(s) try BriTec on YT or (maybe) Mikes unboxing or Chris Titus Tech (bloatware installers hes good for, a tad techy for me now a days though, I just manually de-bloated win11 the best I could) I have that I7 3770 with hyperX...

It's a beast

Aye, I do that with an 18650 battery box, a full 4 hrs on 1080p 60fps 64GB SD.

I seem to remember why I didn't bother last year, no gyro. Used prices on everything are all out of whack, I fear I could not trust ebay for a cam at least Cex has warranty. I have stuff to sell on ebay but I will mark it as used/faulty (working) for spares & repairs because I don't want any...

Its prob Lishui, you would need a KT controller that matches your connectors + LCD + throttle + brakes (all KT) and just keep the YOSE motor & battery if the battery rack is integrated with the YOSE controller you may have issues, if the YOSE controller is a box standalone then it will be...

I will look out for a 1080p rear cam that aldi had last year for 40£ or so. Then review it perhaps.

Thinking about it, I do have one somewhere in a box of firefly early cam gear tbf it was GP compatible. Are they the two main descriptive's that pop from your personal word cloud:p;) Still I need a cam, ideally one with a good battery or easy battery box extendable & some basic gyro. I think...

I have near zero issues, I just give them all the room they need & if the wish to be a bum hole then I let em be. Two passed me today approaching green lights going straight ahead, I was in primary but they passed me with ease as I slowed down a little, then I move to the right hand lane (dual...

I still use Open Source Shotcut, it's free, light weight ish, just enable proxy. It does most formats and can use hardware encoders, GPU/APU - However I don't use it much not much to edit, adding the cam to my bike takes more time than the shop run tbf . With good road use I tend not to engage...

You are basically doing a DIY conversion on a normy bike but you already have the motor and battery. You need to see your motor pin connector type and work out from there. Most modern motor are 9 pin "julet" bullet snap connectors & work with most aftermarket controllers. Watch some ebike...

Lucky the controller isn't integrated into the battery mount. One thing to consider is your handlebar layout with a throttle, half twist, full twist and thumb (various styles), thumb is easier to locate like the wuxing 108x but left side may cause issues - half twist & possibly full, come in...

o_O

https://www.amazon.co.uk/dp/B0B3XDBW8H/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B0B3XDBW8H&pd_rd_w=tSHwr&content-id=amzn1.sym.84ea1bf1-65a8-4363-b8f5-f0df58cbb686&pf_rd_p=84ea1bf1-65a8-4363-b8f5-f0df58cbb686&pf_rd_r=VM7BZC23DETW6YGN7ZGD&pd_rd_wg=exPFh&pd_rd_r=6f3d1636-b3ec-44be-83e0-83cfa50d5777&s=spor...