Search results

So if I just ordered a new controller, connect the brakes, throttle, main power and the 3 motor wires and then short the led connectors or buy a led and connect it the whole thing should work. Edit: I now understand what I'm doing better, I will try this controller just in case it has somehow...

I hadn't realised this would only be a three speed throttle, I think I need a better controller, an lcd and I guess a new throttle system . Would you be able to show me a suitable system I can order

Thanks for the reply and reassurance I haven't messed up anything but my controller, if need be I will order a replacement from bmsbattery. I have sent a few emails out to see how much someone would charge to do it for me because I'm worried about damaging the wheel or battery next time. Also...

Firstly thanks for your help with this, it is much appreciated. Below is the pic of the unit, the wires on the tape were the motor hall sensor which I cut the connector off, at one point I had all these wires connected to each other and i put the battery on, thinking back there may have been a...

I'm completely wrong, it is the motor hall sensor, I cut the wires off that and then put them together , I'm terrified now that I've caused loads of damage.

I will take it all off and send pics tomorrow. I've gone back over exactly what I did and I've come to the realisation that at I had the black, blue , red and yellow of the lcd wires connected at one point, god only knows what I was thinking, in my defence my meds make it hard to think at times...

can anyone recommend a better quality controller and a lcd screen to go with the Q128 48v 500 watt wheel I have.

It's 5 wire

Can't even see a fuse on my battery or do you have to open the box to get to it ? So this is what I bought https://bmsbattery.com/ebike-kit/399-q128-48v400w-500w-front-driving-v-brake-e-bike-kit-ebike-kit.html#/213-rpm-201 and just broke the controller for, which would be a good controller and...

I saw no smoke and there is no smell butt I did connect power a couple of times. I connected red blue yellow and green all to each other . That said Im pretty sure i had it all connected correctly at first, I only started messing around because it wasn't working.

Yeah did it before I read the advice . Do you know any uk stockists where I can get a new suitable controller

Finally found the diagram for this controller and it now has no instructions for not running lcd, but nothing is working , I've a feeling I broke the control box when I mistakenly connected 1234 all together and powered up

I'm struggling to get this working, does anyone know of a good idiots guide to wiring this controller because is driving me mad

Lovely I will get my soldering iron out, thanks for your help

So by short you mean connect those colors together

This is the instructions, I'm guessing it just means to connect them together

I'm just putting my wheelchair trike together using a sku95 torque simulation controller from bms , I'm running it with no lcd , I'm struggling to find instructions but reading other instructions it says to short the lcd wires if you are not using one, sorry for being stupid but that does that...

Thanks for that

Like this with the slot facing down?

Sorry to ask a simple question but my kit bits came today my wheel had nuts and washers in a bag but there is one nut fitted, does this go on the inside of the forks