Search results

Yes .

I thought I mentioned it had four large plastic wheels ? I did it was in #4.

My 201rpm AKM128CST topped out at 19mph @48v with 26" rims. The motor in size is quite tiny and the label will soon fall off, one cna replace it with a 250w sticky label or a printed ali sticky one.

You guys should have started a whole new thread as this is so far off the beaten track of the original. I have noticed for along time that the forum has lost a lot of it's etiquette with threads totally loosing the plot that they turn in to 'brexit type debate threads' where for most there is...

Still hiding behind the 'autism ' tag then. I'm eccentric but don't hide behide the tag. I tell/say things as I see it , if you aren't happy go elsewhere.

Tony will be smiling that some one is having issues with a KT and will be soon wanting to tell you to use a Lishui. D8veh & I have been using KT's for many years with out issues as will have many others, it is user error or not understanding the fairly simple set up of the parameters.

P & C settings are and look pretty ok to me.

Error 03 is a motor hall fault , but can also be a bad Hall connection . Double check the motor connector is 100% pushed in up to the marked line on the motor side of the connector, also check the controller Hall connections. Bar that one has to carry out a Hall wire test. HallSensorTesting.cdr...

People believe what they want to believe , if one has a bent for a mid drive and has tunnel vision regarding them then you won't change someones perceived view of them .

Az, he doesn't know his wh from his watts. I have a feeling he means 750wh batteries though I could be wrong.

That reading is 3.9mph . I suspect they either don't know what they are doing or do not know how to set the KT parameters. As to the PAS you haven't told us anything about the sensor you are using or provided a pic. We need to know which hub motor is being used. A pic of the PAS sensor/disc. A...

I think you are likely replying to a BOT , looking at the way the post is constructed.

Yes correct , one can push 1000w if you like thru a 250w rated motor as that is the relevent law and legal. In reverse putting 250w thru a 1000w rated motor is illegal because of the motor rating. With the 250w rated motor the power is a temporay power. The risk which one has to weigh up is if...

There is no set limit on current on can use, all that matters is the motor is 250w rated. That said one has to be careful with how much current one applies as eventually the motor may get hot and strip the nylon planetary gears. One should be fine with 22a for short bursts, typically 15 - 18a is...

25mm is too far to spread forks , 5 -10mm but not 25mm.

Post links then to cheaper offers.

A part from Woosh, Risunuk are the only other place I have seen a 48v tsdz2 listed as 250w.

TBK sell AMK motor gears and face plates with the fixed hub spline, if you need other motor parts they say they can supply them.

Imv Torx screws are much better though as Allen keys can round off on the ends.

I took on rescue Tuxedo feline last xmas eve , she came with issues. Mainly over weight and cancer . Sadly Miss Molly passed away about 8.5 months later, the poor girl decided enough was enough and one late night went out on to the patio to lay down and took her last breath. This lady was 11...