Search results

Thanks for your answer. Do you know how I could use G-clamp to bend metal sheet? I mean do I have to do it like this? http://www.youtube.com/watch?v=9oNXGCIbkIw Here is what I plan to cover: Going to put cereal box over that shortlty. Why is it better to MIG it rather than getting tabs and...

No, I haven't made any template yet. Not too sure how to do a template. I suppose I need to find a big cardboard (ex: one for the bike) and adjust it to make it fit to the scooter? I've seen some people use 3D modelling tool, not sure if it's useful? Also, I was thinking about creating...

Thanks for the answer Wurly. Do you know if it's possible to weld it myself? Do you know where I could find a tutorial for that and the tools required?

Guys, I found this metal sheet on ebay: 3 SHEET METAL STEEL blanks 620x190x1.0 **BARGAIN** | eBay But I don't know what I should do to transform it to cover. Any idea?

You need to host the picture from outside. You can for example upload your pictures in Imagehack (imageshack.us) and paste the picture link here. I use dropbox because I found it very convenient.

Everything is wrapped now d3veh. Thanks for the advice. Hope it's not going to break again.. And the seller should be happy (he asked me to show him all the cables of the controller when... the problem was only on this little board :)

FIXED!!!! THANKS FOR YOUR HELP GUYS, without you I would never have been able to fix that so quickly. Special thanks to d8veh :)) This my ugly soldering skill :) It smelt the burnt when I was soldering, maybe soldering at 350C was too hot. But hey, I'm not yet a soldering expert ;)

Nice spot d3veh, it seems that the green cable was connected to VD (I wasn't able to see that with my eyes, and you spotted that from a picture? How did you do that? :)): Should I solder? Is there any risk? Because the throttle is still working for now

Just removed everything to take pictures. Front: Back: It wasn't difficult at all to do that. Thanks for your help :) Not sure what/where are the 2 white arrows?

I'm not sure how it would fit on my bike. But if it's stealthy that's perfect Here is a picture of my bike: The battery and maybe the controller could go on the rear rack.

Do you mean the cables outside the board? Everything seem to be connected correctly. Or do you mean to remove completely the board to check the circuit on the back?

Yes, it's connected. The strange thing is that the pedelec is working... but stuck to the lowest speed. So the sensor is correctly connected. I suspect it's the green cable from the speed switcher that's has to be solded. But I'm not sure and I don't know where.

It's me again. The pedelec is still not working properly (since last month). Here is a better picture: Any idea how to fix the pedelec? (the throttle is still working)

I just checked everything, here is how cables are connected to the bike: Thanks for the proposition d8veh. Do you know if I have to drill a hole in my bike frame to install it?

Thanks D4veh/ I'm going to check that. How did you guess for all the other connectors?

Thanks NRG. But mine was written 3.8mm. I'm going to measure again. But if it's not 3.6mm or 4mm I won't be able to arrange the spokes?

Hello there, I've been following closely JerrySimon thread on his portable e-bike with battery and controller in a backpack: I want to do the saaaaaame!!! :) I opened everything from my controller and I have this: I'm still unsure what are doing half of the connectors, even thought I have...

Just did my pencil test, this stuff is amazing, no need to buy any expensive tool: http://www.youtube.com/watch?v=zxOUX_dqhxg I think my wheel is not straight, I may need to buy a spoke tool: I found a spoke key from 10G to 15G. Not sure what it mean? I think I'd need something around 3.75mm...

Flecc, do you mean that because Kudos bike are limited to 250W, they don't drain (and strain) the battery too much. That allow them to provide 1500 cycles number?

Thanks for the link scottyf. The price seems really interesting. I purchased these lipo: HobbyKing R/C Hobby Store : ZIPPY Flightmax 8000mAh 5S1P 30C They are much more expensive and I may have to pay taxes. Maybe I should look at cheaper lipo :)