Search results

If th display is alive then most likely and common cause is cut off brake issue if you have utilised them, often a magnet alignment on one of the levers. Tbh one is best only to use one brake lever cut off and remove the other one , then it is so much sipler to know where the fault lays. Rear...

All my observations are simply by standing outside my back door and looking. For nearer objects like the moon I have a 5" scope to see it better.

I wouldn't touch a Sram motor as they will likely end up leaving the user high and dry, a case point with their geared hubs when they pulled out of the market .

One doesn't need cable ties or for that matter scissor's , simply use velcro ties that won't pinch or damage the smaller wires inside the main outer sheath.

Personally I think it is common sense not to leave a battery on an over night charge regime. For my phone I use a timer as for my laptop only when I'm using it , is it charged. The ebike battery I will put on a timer but not when I'm sleeping.

That is quite poor then having a continuous long cable , looks like I 'm wrong then. All my hubs have short motor cable front or rear.

Today all hubs have a motor cable julet connector approx. 18- 20cm long.

Tonight with the naked eye one saw the following shining stars to just name a few, Jupiter , Venus, Mars, the 7 sisters aka Plaeides , Aldebaran & the Taurus constellation, Betelgeuse, Rigel of the Orion constellaton & the 3 stars known as Orion's belt, the 4 stars forming the Aries...

That' s the issue one can only see via imaging and spending a lot of money, it is all views that the naked eye even thru a good scope can't see. It's like the Green comet, one may see a very faint Green smudge on a scope and that is about it , it needs good imaging equipment thru the scope...

The Bikee (Italian design I think) has had so many false starts in the last 18m /2yrs it seems to be like the other start ups, slow getting to the market and then quite expenisve . Typically the design is similar to the older GNG/Cyclone motors in that the motor unit bolts to the frame and...

A part from the moon any celestial body seen from earth using bins or scopes are just small specks in the sky , which for most leave them very unimpressed. Folks think they will see the fine detail and close up views as seen by the huble scope or the various explorers that pass by these distant...

He's the bike equivalent of Fred Dibnah, even his dialect is similar with his tones.

The e cargo, utility section isn't overly used but is pretty handy so one can keep some topics from being lost in the main sections. Then again my Ute cargo build thread may have been enough to dissaude many from looking :eek:.

For wild camping side of things and trail riding if not taking a dog along for the ride, I'd opt for the Burley coho xc with 3" or 4" fat tyre option. If carry load stability is needed then a two wheel trailer, end of day it depends on the usage and load capability. One reason why I opted for...

The parts you are looking for are for the silver fish style batteries have look on ebay for 'silverfish mounting kit ' not sure if they are separatley or not , they are however suppplied with most new batteries sold. The bottom receiver I doubt if they are like that now so the designs will...

What about the job and the creative artwork/ joinery, are you still involved in the trade. No need to answer if the subject is off limits.

EPJ good to see you back and still in the land of the living. A lot of cyclists whether on E or unpowered have seen changes since the first lock down and a lot likewise just haven't got back in the saddle as previously. I myself am one most of my use now is utilitarian and for the greater good...

That's not surprising that it can't hold a moped , the motor alone is probably 8kg alone. They will though hold up most pedelecs quite safely.

Make sure the inner part rotates smoothly, one can pry the two pieces apart to make sure it is clean inside and give it a light lube with silicone lube or a smear of liquid grease. The inner part with the splines needs to firmly grip the axle shaft of the BB otherwise it won't work , one can...

Typically those type are 12 poles inside.