Search results

Rim tape is always essential.

Rear motor is a lot better than a front one in all respects. The only reason to fit a front one is that you can't fit a rear one because you have hub-gears or something like that. It's a bit easier to fit a front motor, but it's also easier to get it dangerously wrong. There's plenty of advice...

Does that change significantly in one year?

What's worse for labour is that three out of the four have switched to voting conservative.

They were at the Cycle show. They wouldn't have spent all that money if they were in financial trouble.

I just noticed that something doesn't add up. The fertility/reproduction rate is 1.8 per couple. so the resident population would go down if it weren't for immigration. If the population was 67 mil in 2018, that population would be less in 2019, but it increased by 388K. The only way that could...

That's just political spin. It doesn't take a genius to figure out that if the population increases by 20%, you need 20% more hospitals, 20% more nurses, 20% more doctors, 20% more houses, 20% more schools, etc, no matter where they come from. We haven't had 20% more of any of those. That's why...

What do you mean by that. You need to explain a few things if you want help.

He doesn't have a Julet cable. The Vulcan one is wired directly into the potted controller. The 9 pin connector is a special one. That's why I said "special equipment". You can't test anything without one of those connectors or cutting into the motor wire. The only access to the hall sensors is...

You're talking out of a hole in your backside as usual. You have no idea what the Vulcan electrics are like. Cutting and pasting irrelevant stuff that you found on the internet will only confuse OP and anybody else that's trying to fix their Carrera bike.

You misunderstand. That table shows the net result. A lot of people left the UK and more died than were born. What I said was how many new people come into the UK each year. Many of them came from unstable and insecure circumstances, so are likely to have more substantial medical needs than your...

Who told you to change all those parameters? You should just install it and it should work. Can you put them all back to how they were?

Unfortunately I don't know what you mean. What display parameters are you setting? Do you mean the 1 to 5 PAS levels? Secondly, what do you mean by it always go to maximum speed? Is there a different power on each level? Did you check the actual max speed on each level?

His controller is potted and his connectors are moulded, so none of that will work on his bike. Error code 42 is a hall sensor failure in the motor. They don't normally fail unless water gets into the motor. You might be lucky with it only being a fault in the motor connector. You don't make it...

You have a switch in each brake and a wire coming from them. Follow the wire until you come to a connector. pull the connector apart. do it to each brake in turn to see which, if any, make the problem go away.

Something like 10 million extra people came into the UK in the last 15 years, regardless of where from. That's 30 cities the size of Birmingham as it was at the start of that period. How many new hospitals did they build in that time? This is the cause of the problem. It's simple maths. I...

I still don't trust that account. she said he went to sleep on a pile of coats as if he found them on the floor. He's only lying on his own coat. Don't get me wrong, I'm not saying that there's nothing wrong with the NHS. we can agree that the demand is too high. Maybe the flood of 600,000 plus...

Of course the eagle-eyed amongst you might have noticed that the kid is lying on his coat, and it's what looks like his mother's coat on top of him, not a hospital blanket. Do you think that the hospital staff found his coat somewhere, put it on the ground and told the kid to lie on it? It...

Another thing. I had to fit a plain washer on the brake side axle on just about every motor I fitted to bring the disc in line with the centre of the caliper. I can see in the photo that your caliper is right to one side, which will probably cause the brake to bind and give poor braking.

The camera is in line with the left centre tread line, because it's straight when tested with a straight edge. The straight edge continues to just left of the hole where his motor wire comes through, which is where it would be if the tyre were central. There's still a question of whether his...