Search results

Check next for the brake binding. Spin the wheel forward by hand slowly. Does the rim touch one of the pads? Does the squeak occur once per revolution?

the NCX seat post is not as natural as an FS bike but you will quickly get used to it. Basically, when you ride over a bump, the trapezoid suspension moves your body backward instead of bouncing you upward, so you do not experience the jolt that you normally get.

hi Dave, take the chain off and run on throttle to locate where the noise come from.

+1 from me. You can also take the NCX post from one bike to another.

maybe that's not far from the truth if you could read their mind. Staying is intolerable to some but divorce is an expensive business. If you are money minded, you wouldn't want a divorce or if you have to, don't go to the lawyers.

Daily Express readership. Their prevailing mood is there is no point trying to negotiate with the EU. The EU is a rule based organisation, any concession made to the UK will impact on their precious rules. If Mr Barnier can't make any concession, what is the point to continue negotiating with a...

JC needs the speed and energy of Ed Milliband. He should replace Keir Stamner with Ed M.

This is a weekly tracking poll. You'd need to get the moving average plot to make sense. Roughly speaking, JC is not doing well against TM but that's before DD threatened to resign and the BJ tape...

Let's look at this imaginary scenario. I am in charge of booking direct emailing and I don't have a database of email addresses. What shall I do? As it happens, I have a friend who knows an internet marketing firm that has a few millions email addresses with just the right profile. All I need...

how about fitting the throttle on a bar extender?

install the brake sensor: 1. plug one brake sensor in. 2. switch on the LCD, you should see error 25 shown. Error 25 means brake sensor is activated, the motor power is cut, 3. bring the magnet closer and closer to the sensor head. When it's close enough, error 25 disappears on the LCD. That...

You have the Alivio rear derailleur but the principle is still the same. Use gears 1-8. You need to adjust the H and L limit screws to stop the chain coming off on 9. Make sure that the chain still runs smoothly on 8 and does not jump anywhere on 9. If it jumps off the cog on 9, turn the H screw...

That's correct. it's the regulations. The label needs to be made by either the factory or us. If we put a new sticker on, our insurers won't cover it, so we don't chance it.

the power is already limited, the factory 350W label was unfortunate. It is very good at low power but the 48V SWX02 is even better and smoother.

I can supply a 700C front BPM kit like this one: http://wooshbikes.co.uk/cart/#/product/uid-122-frontbpm-13ah/front-bpm-kit-with-36v-13ah-battery

my problem is running out of stock from around October. I still have to cover wages until it's sorted - earliest March/April 2019.

rule of origin applies. If it's made in China, then ADD will apply.

Mr Barnier has rejected TM's NI backstop proposal: "it must be Ireland-only, not UK-wide" So no extended transition by the NI backdoor! TM will have to give up NI or face WTO. I can see a new GE coming soon.

how about jamming mobile phone signal in school ground. They'll be forced to use a landline.

what are you complaining about? flecc is proven right, polls reveal more voters getting fed up with what brexit is turning into, brexiteers are preparing for defeat, JC is slowing moving to remaining in the SM. only 5 more years like this.