Search results

I am out of suggestions :( Any one has a better idea beside using an external PAS?

that's correct. The motor does not have to be replaced right away, as long as you keep your speed to less than 24mph, your motor is fine to run at 48V. It's worth considering the upgrade in a few years when the battery needs replacing.

you need to make sure that only 3 wires are connected to the internal PAS: ground, 5V and only one Hall wire, in this case, yellow. The other Hall output (blue) should be left unconnected and insulated. Check also when spinning the cranks in reverse (anticlockwise). If it starts the motor, then...

ah no. The casing is right but you can't just change from 36V for 48V. At least the LCD and controller have to be changed to 48V. The ones fitted in the Rio are not dual voltage. The motor wheel should also be changed to the 48V version. The 36V has winding code 13, the 48V has winding code 16...

yes, Damian. Dorado is the model of the casing.

You only need to test that the controller still works with an external PAS. Put the PAS disc on a pen and use the pen to rotate the disc in front of the sensor head. If the head has an LED, the LED should flash and the motor starts. I think you already found out that the built in PAS is still...

From the Luxembourg prime minister: "As an EU member, Britain was forever asking for opt-outs. Now they are out, they want a load of opt-ins."

if yellow is pulsing when you turn the cranks then the controller does not respond to the PAS signal. You will need to borrow another PAS sensor to test the controller with it. I can lend you one if you are stuck.

cwah, I've received an advert for this bike, and I thought of you! Just bolt a bar between the two batteries to rest your feet on for a perfect transport!

Phil, please check the continuity between brown on the PAS connector to red or brown on the speed sensor. If it beeps then brown is definitely the 5V line thus yellow is the signal wire. If it does not beep, then check the continuity between yellow on the PAS connector to red or brown on the...

you are not alone. The problem is this kind of killings are exploited by politicians to further their own agenda, usually to spread, justify and intensify xenophobia.

a typical error is to wrongly identify the 5V and signal wire of the pedal sensor connector on the controller. When that happens, the PAS seems to be dead. Unplug the PAS first. Check only the controller side. Check with a multitester, the 5V wire reads slightly LOWER voltage than the signal...

Phil, Your motor works on throttle but not on PAS: that means the Hall signals are good, the PAS signal is not. The PAS connector has 4 wires: red: 5V black: ground yellow: Hall1 output green: Hall2 output You can use either yellow or green to connect to your controller. You can test the PAS...

It seems to me that the CFP is being used as a scapegoat. If we accept the single market for all economic activity inside the EU, then a CFP makes total sense. The correction is not to allow UK registered vessels and catch that use UK permits to land fish outside the UK. I think that after...

those big American internet companies are a law unto themselves. This story will run and run, possibly until the US drops Section 230 of the Communications Decency Act 1996 and make companies like FB, Google, Amazon, Ebay, WhatsApp etc responsible for misuse of personal data entrusted to them by...

Mozhete li vy zaplatit' v bitkoynakh tovarishcha?

who do you think misusing the technology? Analytica? FB created the API, opened the door to customers to buy information from them.

I am sure it works with the advertisers and for FB - it sounds convincing enough, not sure it works with the audience. Put it this way, how often do you click on the adverts? The real work is done by the 'Russians' - in forums like this. and before you ask, no, I don't have any relations in Moscow.

the quickest way is to test with a multitester when the motor is connected and powered. 1. Gain access to the Hall sensor wires, typically red: 5V black: ground yellow, green, blue: Hall signals Switch on the LCD. Hook the multitester to check the between ground and the signal wires, one at a...

well, he knows where his heart is. (where he finds his wallet).