Search results

tory fundraisers organise a lot of 'charity do's where access to ministers are openly auctioned to the highest bidders. I call this practice bribery..

is your bike the Rockrider 520?

alternatively, would you be interested in a second hand woosh 16" folding Gallego? It's little used, in near perfect condition still under guarantee. The owner bought it for her boat. Offer around £600 is invited. http://wooshbikes.co.uk/?gallego

I am working - would you mind? (I still work as a programmer. That's why I am on the computer most of the time, I do bikes in the afternoon, programming most of the evening).

I am afraid that his prophesy is short lived. that time is already with us.

Gollum has a few cards that he keeps well close to his chest and he sure will not tell the EU about his future negotiating strategy should he become PM.

I see JRM and his band of hard brexiters go for the CFP, the same way that TM goes after the Russians. Why don't they accept that the transition deal has killed any possibility of a hard brexit.

you can install a Bafang BBS01B mid motor on it. It'll climb any hill.

you wouldn't push a bike across a road when there is a car approaching would you?

that's autonomous driving level 5. We are at level 3/4 and may be 10-30 years from level 5. Level 0: This one is pretty basic. The driver (human) controls it all: steering, brakes, throttle, power. It's what you've been doing all along. Level 1: This driver-assistance level means that most...

that is a problem for the AI software and sensors to solve. I reckon in less than 30 years, the AI will be better than any human driver. By then, cars will probably be fitted with transponders.

this is how the sensor head is mounted: The gap is adjustable.

I use the same magnet disc as the KT-D12 but the sensor head is a Bafang one. The mounting is 3D printed to suit the customer's bike. That's why I usually ask for pictures of the bottom bracket area because the gap between the seat post and the chainring varies from bike to bike. This is an...

I think the important issue here is the fact that the backup driver did not do better than the AI and detection software. He should have seen the cyclist and understood her intention.

don't worry about this, Mike. Lots of members have fitted the pedal sensors to bottom brackets with external ballbearings. You probably won't have to buy anything. We usually supply a pre-drilled (45mm diameter hole) 12 magnet disc with a metal ring, you cabletie the ring to the spokes of the...

That looks like a standard 3-pin PAS connector. Mike, can you upload a picture of the sensor head?

he will look just as silly as (if not more so) BJ stuck on a zip line.

the problem exists alright. Congested cities could do with more public transport which has to be cost effective to wean people off personal cars. driverless electric taxis can be a good solution. By the time driverless systems get to level 5, the pent up demand would be enormous. In this...

are you sure that you have Higo connectors? Can you post some pictures? Most of the kits use Julet or Bafang cable system.

Have you considered a front wheel conversion with a rear rack battery? Something like an XF07 front hub kit with 13AH rack battery would cost you less than £500. Something like this lightweight £400 step through bike would be a good partner, the total weight of the converted bike is less than...