Search results

Wouldn't it just destroy Chainrings and sprocket teeth super fast!? Moving the failure to more expensive parts!

Nice one VFR, if it isn't a full on thread hijack I'm wondering whether one of their controllers and lcd might be a good fit for the broken BESV PAS1 I have at the moment. It seems to have a BB torque sensor

Thnaks vfr, I'll go hunting for a 250w controller and lcd that will fit

Hi vfr, thanks. Deffo just the two,i checked that early on and plugged in different batteries too. Bike behaved same regardless. Sorry to bang on about this but how does the bike work without a pas sensor? Halls?

Thanks vfr If Nealh is right and largely Bafang use higo then might an old Bafang LED on/off and pass unit do? Also any potential jumper option to bypass lcd and get pas 1? I'm worried about the lack of a pas sensor. Doesn't even seen to be any output from the controller So a standard ish...

1

I'm trying help community bike repair group with an unusual ebike. A full suspension, carbon fibre, small wheel bike. It has a rear AK motor, a proprietary lcd and battery , a controller I don't recognise and a strange failure. I'll try to keep this succient. The issue is that the lcd fires...

I'm trying help community bike repair group with an unusual ebike. A full suspension, carbon fibre, small wheel bike. It has a rear AK motor, a proprietary lcd and battery , a controller I don't recognise and a strange failure. I'll try to keep this succient. The issue is that the lcd fires...

A super nice chap dropped this bike to me yesterday, it is a right headsctracher tbh. I'm going to start a fresh repair thread to explain, might help them and someone else too Will post redirect thread soon

Thats really helpful, Thanks Vfr So, I think, that if I can find 1. one with easily replaceable electrodes, and 2. One that can cope with 0.15 non slotted nickel strips (though I have a dremmel and could buy slotted as well in mitigation) Then that's the worst of the downsides sorted. Just...

I don't put my bikes on car /motor home racks but I'm lead to belive the vortex can really drive water into every nook and cranny when on rear rack. I'd try to wrap the bikes in tarp or something. They also hate being left in standing rain so again, tarp is your friend when camping Always...

Agreed, not had my throttle connected for 3 months and missed it off road for occasions as you mention. Also those occasions when your speed is dropping but the ground is so bumpy that pedalling would involve dropping the speed down, say just before a climb, a quick few seconds throttle blast...

I take your Araldite and raise you the god called Sugru ;)

I use xt60 as I have multiple 36v batteries ra going from 3ah to 21ah. By using xt60 they are easily swappable on my bike (and indeed across both my current bikes). This is the only reason not to solder direct as VFR suggests Nealh is quite right xt60 are not waterproof per se. But they are...

I agree on what I see. How much smaller or lighter is it really once you add a input /output cable? And since balancing happens at the end of the charge Im not totally convinced that charging to a lesser point repeatedly will extend the life of your whole pack. Yes, charging to 95% and not...

Oh, and Welcome :)

My view on the BBS vs tongsheng is one is torque sensroed and one is cadence They feel very different. To get max power out of the TS you néed to put max effort in. For the BBS you can "ghost pedal" by which I mean you can get max power by simply turning the pedals For me BBS all day long...

Looks to be the groupset mainly. So the gears are Claris vs Altus

#Aliexpress ￡31.49 50%OFF | 6 Gears Adjustable Mini spot welder with Type-C Interface Quick-Release Pens Spot Welding Machine Spot Welding Pen for18650 https://a.aliexpress.com/_B1XJZR

[£26.92 38% OFF]4V-12V Mini Spot Welder Welding Machine Energy Storage Spot Welder 18650 Battery Spot Welder Professional Tools from Tools on banggood.com https://banggood.app.link/R95Z1k3tV7