Search results

after finally completing my bike, it needs a few tweaks here and there, one being a thumb throttle, as i find handling the bike a little hard with the twist throttle, as this sometimes slips on when im maneuvering the bike which isnt the best, plus im wanting to get a bit more control over the...

thanks all this is a real help

HI D8veh, thanks, i think you are right about the throttle, as it doesn't connect to the LED outside the controller, like the diagram suggests. The LED for the PAS seems to have 5 selection though. so far i have worked out no lights = PAS off light over low=low light over med=medium light...

ah ok phil, i will try it!

ok thanks this is starting to become clearer. so when al low/med/high are lit does that not mean anything then? So if i choose to turn off the PAS, by pressing the (-) so no lights on low/med/high section are lit, what happens to the speed of the throttle? does it just default to low? reason...

HI yes i have wired throttle into controller not LED lol. thanks for help, how will i know i have the "walk mode" on, as nothing seems to change on the display. what will i experience...just more speed? At the moment when i pedal in low is seems to give a massive umph! wondering if i have...

HI Have now fitted it all together and it all works fab, had to mess about housing the battery which has caused the delay. Went out on it yesterday and have a few questions. How do i switch off the PAS? this is the LED one i have http://www.greenbikekit.com/led-display.html Is the PAS...

ok thanks D8veh, looks like i cant use 3 way switch which is a shame. I understand what you mean now about the sensor. Sorry about picture. the throttle is this one i think...

HI D8veh, was hoping you would reply so thanks :) the kit is mostly as discussed in this post http://www.pedelecs.co.uk/forum/threads/battery-advice.16767/ but my throttle is from the kit off amazon along with the wheel and hub motor, everything else is from my order from GBK. this is the...

ok so i now have my controller (just waiting for correct battery, but thought i would look at rest of kit and get it figured out while i wait) so far i have worked out from diagram LED meter plugs into red, black and white wire from controller PAS plugs into red, black and green wire from...

thanks, i wont be making another order, im just doing 1 kit, but GBK have been fairly good at responding to my emails and are planning to send correct battery...just hope it comes soon, with out any further problems ..fingers crossed

Hi After seeking much advice etc (see battery advice thread http://www.pedelecs.co.uk/forum/threads/battery-advice.16767/) i finally placed my order with GBK. I had email correspondence with them before hand to check that the 36 v rack battery i wanted...

thanks, i think i more or less ready to order from gbk. so far this is what will be in my cart *controller http://www.greenbikekit.com/250w-36v-electric-bicycle-hub-motor-controller.html *3 speed switch http://www.greenbikekit.com/3-speed-switch.html *hidden wire brake sensor...

thanks d8veh, that's really helpful. Have now finally decided on mounting whatever battery i get on my rear rack, as you said it will balance the bike also. Have emailed GBK, to be told my preferred choice...

thanks for that, really helpful. Now clearer about what im doing, just now need to decide on which battery to go with as made a mock up model of the bottle battery and found it is just that slight too long to fit in frame where i wanted it ...sigh! back to the drawing board, may have to have...

thanks mike thats really helpful. D8veh, thanks this has helped me understand your reasoning behind the use of HWBS, think i would like to keep my old brakes as one in this kit are a bit...well naf to say the least. Having read various posts about PAS looking like i can just not bother...

hi, just reread your post, not sure i understand about the brakes, the ones with this kit, apparently cut power when brakes applied, why would i also need inline brake sensors? thanks re torque arms, i had seen i would need those for safety. One last question, i was going to not bother with...

thanks for your advice mike and d8veh, looking now i wish i had just gone with GBK and bought the whole lot, i was just usure about buying from china and al the shipping/VAT etc as never bought from their before. I already had the kit from amazon so just need to sort out the battery, but from...

hi i have this kit http://www.amazon.co.uk/SainSpeed-Conversion-Controller-Assistant-Indicator/dp/B00E56JY6Q/ref=pd_sim_sbs_sg_2 and am now in need of suitable battery. looking at them would prefer one which fits on seat post or frame. thinking of one like this...