Search results

Hi All.Help needed.the controller wires are Red-Black-Green. the PAS wires are Red-Black-Blue.I wired them Red to Red- Black to Black- Blue to Green Not Working.

H i.Neal.Can you take this apart as i only need Yellow and Green.John

Hi All. when you turn the pedals pas light flash`s but front wheel don`t turn.John

Hi.help please.PAS turn the pedals light flash but the front wheel don`t turn thanks for any help given.John

Hi Help Brown5v- BlackGND- YellowSIGNAL - Red 5v Green? - Yellow? Thanks for any help John

Hi. My e-bike display not turning on the battery fully charged theres power to the controller help.John

Hi Can anybody tell where i can buy the 6 pin connector in GB.John

Hi All.Where can buy this cable.John

Nealh Hi Neal am the man with Sparticle electric motor.Do you build wheels hope to be down on 24.John

Hi All Can you use a 36v 350w controller on a 36v 250w motor.John

Hi Can you use a 36v 350w Controller on a 36v 250w wheel. John

Hi. 36v 250w Motor from 24inch Wheel will it work in a 16inch Prompton Bike Wheel.John

Hi Me again on the controller have (Black-Blue-Red) Pas wire have (Red-Black-Blue) can i just cut the connectors of and join them together John

Hi Where do these 6 wires go to,do you have to use them. John

Hi Need some help to sort out the wiring where do the small Yellow Green Blue wires go I think the rest are ok John thanks you for any help given

Hi. Have a Sparticle motor on my Brompton bike it is getting quite a lot of noise from the motor anybody know what the problem is. was going to fit a new motor but the Sparticle motor has only 3 pins on the motor wire the new motor has 9 pins will the controller still work with the new...

Hi The fork and motor rub together on 1 side but not on the other side what could be the problem thanks for any help John

Hi All Just bought a kit to put on a trike when it arrived the wheel had 6 spokes not fitted to the nipples have bought of this firm before it seams they couldn`t be bothered took the wheel to a bike shop to have it fixed

Hi All 4 25c 2700mah 3SIP 11.1 tested with Multimeter 38.5v on bike 25.32 something wrong any idea photo to follow Thanks For Any Help

Hi All Have 4 25c-2700 3s1p have wired them series and parallel but only get 25v should I get 44.4v 5400mah will put photo up of wiring Thanks for any help mygrumpy001