Search results

So I know this is not the correct way to put the nut on but it will not go on the other way around Any ideas how I can fix this , The thread is too deep on the opposite (correct way)

Just bought a woosh faro with a rear hub motor. Axle is thicker than normal bike axles by a few mm. Anyone got any ideas or any companies sell trailer hitches/couplers?

Looking for a bike for under 1k Has to be cycle to work (vivup) 16 stone rider, 20km commute few hills Would like a throttle (if possible) Any recommendations

I've found a problem which happened a few days ago on standard Chinese dd 1000w, was crusing along on the throttle and the power cut, Having hand spinning the wheel the motor kicked back in and got me home . Didn't think much to it but today after getting the bike out fresh battery etc Bike...

Anyone know how to do it, stays at around 6mph free wheeling I've done the 1919 secret settings and it's already 45kph Bike is pretty nice only done 8 mile today on assist 1, nice bit of exercise also got a trailer for the kids which has a claw like grip

Right is there any way I can fit a torque arm over my big fat connection plug, I'm really crap at soldering I found out that when making the battery (but it works fine) any torque arms which fit over it , I'm scared if I try disconnect the wires from the plug I'll mess it a up and break stuff...

Did any one watch the best lb for lb fighter last night destroy linares who was a stone heavier

So...... Work have put on the cycle scheme so on the lookout for a bike under a grand. I already have a 1000w DD bike but hoping to sell to pay for a family holiday and it's far to powerful , I came into this hoping to lose weight. I'm looking for a bike which has a good mixture of fun (light...

Looking to purchase a mountain bike with middrive via cycle to work(vivup) I believe the max is £1000 to spend. I don't really want to fork out anymore Thanks

Received second BMS after frying the previous one , this one has no wiring diagram and has on one side 2 x B- and on the opposite side 2 x C- I also have a b+ label on the board but a different soldering base different to the others.

Hey uo, I'm running a standard 26a controller ,and it's get very hot to touch after ridong. It lives in a plastic tote at the moment so no air to cool it down. Battery is a 58v 20ah MOSFETs are rated at 63v. The bag I got with controller will never fit it , Anyone point me in the right direction...

Can anyone recommend a cheapish watt meter, The easier the install the better

Right trying to sort out some brakes today ,bike has been running fine , and when putting the wheel back on its not spinning at all , It's like there is some stepped reistancre,it turns with small equal pressure each time. I held the axle in two clamps and it's exactly the same. Bearing maybe ...

Right I'd like to buy an LCD display for my controller but confused by the option's. My controller is a generic Chinese 48v 1000w unit. I'd be looking at the kt-lcd3 but the adapter looks very different to the ones my controller has. I've read there is an s series LCD display but struggling to...

Currently building DIY build took me a few months to get this far as I've been parts in stages , Built battery which was a massive learning curve but actually happy I've done it was given lots of old battery's from local hospital were I work for. So basically cost me nothing. Well my first...

Anyone know of any UK stockists,cheaper the better also. Tried modding a 42v hoverboard charger butnonly increases to 48v. Thank you

Can anyone point me in the direction to finding a 36v charger for this connection. Is it a dmx 5pin connection or am I miles off! I've got a soldering iron if necessary, Original charger is 70quid from halfrauds and won't be in stock until middle of December. BTW there's no information on...

Looking to convert a bike I have had a while cost me £45 to say the least. Everything works. 24 gears 3x8. Shimano alievo cassette. Front forks quite spongy going to see about locking out/repair. 26inch wheels Hydraulic discs both sides Bit the thing is it's a small frame. I'm 5ft9 and I...

Good afternoon, First off can I say fantastic site, Community looks excellent and I'm looking forward to taking part if I can. I'm 31 with a young family ex Soldier who has piled on the pounds since leaving, work on the ambulances now, living in a village near Skipton called Bradley if anyone...