Search results

I am adding this thread for those who may have a problem with the crank sensor and particularly with Freego e-bikes. If my threads have been followed it will be seen about the problems i have had with my crank sensor. At last I have worked out the problem. So thanks to those on this forum who...

Hi Nealh, I am aware that the magnetic sensor plate is directional, there are arrows on the plastic sensor plate showing what is required in position. Upon trying the new sensor neither back peddling or forward peddling worked with the new sensor on either cycle! I tried this procedure on both...

Hi, Many thanks to vfr400 for a prompt reply. Having purchased from Ebay a new crank sensor as shown below. i tried it on my freego cycle. once connected and ensuring the sequence of cabling was correct i powered the cycle. I tried the throttle first which continued to work OK, and powered the...

Hello vfr400, Many thanks for your prompt reply. I have used your link and ordered the part as suggested. I have looked carefully that the wires for the sensor are correct, and they seem fine. So now waiting. Thank you

#1 Hello, by using this site i am looking for assistance to rectify damage caused to my Freego Eagle, all of which has been caused during the service i had on the cycle by a Freego agent in my area over two years ago. Because i broke my hip more or less at the same time i have not used the...

Hello, by using this site i am looking for assistance to rectify damage caused to my Freego Eagle, all of which has been caused during the service i had on the cycle by a Freego agent in my area over two years ago. Because i broke my hip more or less at the same time i have not used the cycle...

Hello to all on the pedelec forum. Until i spoke to a worker at E-Bikes.co.uk, i did not know of your existence. So about me and my wife. We are booth now in our middle 60`s and have for some time enjoyed cycling, not too far mainly local but as we became older my wife began to fine peddling an...