Search results

Now available as Thing: 3439550.

No link, there, can't stick a file on your f/b or Twatter a/c. Won't attach, either (unsupported file extension). Bugger. Ho hum. You know full well who this is... :)

Would do, but am having difficulty in finding resources section... :(

Old thread, but still valid. My take on this was to 3D print brackets, using a cheap PRC N.O. push to make switch.

Just seen these posts. Update on my Bali. All good, and still enjoying it tremendously, am a serious Woosh convert! Seems my link wasn't in that last post of mine, so I'll try again, here...http://www.skysurfer.uk/wordpress/?page_id=389. Thanks to Jim & Andy at the shop.

All sorts. One almost complete pedal version. The pedal frame was obtained a couple of years ago,, and been fitted with a cheap Tesco kid's bike fittings, but it works fine. Needs a backrest to finish. One electric bike in bits. The electric frame has two wheels, but no forks (they're different...

I've done around 800 miles on mine, & I love it so much, my other bikes are going. My full review is here, at least for now.

trex, thanks for your replies on this thread. I've just bought a Bali, and suffered the same slack stem. Same click, too. Stem: Fixed, thanks to this thread. Click: I'm sure it's the 'gearbox' engaging, bit off putting initially, but only as weird as when still, backpedalling and the chain...

Haar! Y'all know what coming next... Yup. identifying the wires. I have the looms that exit the motor, but no control gear. Rooting through t'interweb to buy the original controllers isn't really an option, it's more than a bit cost prohibitive. But. I'm sure that with correct ID on the looms...

Genius! Top site, will absorb & overcome! :D

d8veh, thanks for your post. Not too sure, I was hoping that the output from the controller would be just a variable voltage, as the motor, although apparently brushless, seems to have the controlling circuit built in to the casing that mounts the drive to the bike, with only two thick wires...

I'm looking for a 24v 250w controller for brushed motors with PAS.

Hi, folks. I've a few bits of said machine, notably the Panasonic brushless motor I'm going to hopefully run. I'm having difficulty in sourcing a suitable controller. It has TWO thick power wires, red & black. I'm assuming the electronics are in the ally case to actually drive the motor, as it...

I had an accident that left my feet & legs at less than optimum. I now suffer from advanced, chronic arthritis in my left foot. I walked into Decathlon to buy a low-end 'mountain' bike, and came out with their last e-bike, an elops hybrid, with front drive. It was the display model, & I managed...

My head exploded...:confused:

All fine, but try to use them with cold, wet hands... I'm still looking for XLR's with at least IP68. Best,

Apologies if this isn't in the right forum, I can't figure out how to post in Technical. Dhuh! Electric bikes are convenient, but the battery has to be connected to the loom on the bike. Has anybody found a cost effective (translate:- cheap) plug to do this? I've tried to look at 3 pin XLR's...

I know what you mean, I'd be hitting it with a brick. But it seems like a 'tickler' for your system. Although you can get GPS, speed, distance logged from your phone as a stand alone, this thing would be useful to me to ensure that my cells don't drop below max discharge. But as I'd have to take...

Hi, guys. I've obtained a second hand Li-Ion pack off a wheelchair. The cells seem to be OK, 64 of them! I don't think they're A123's, as there's no indication of that on them. I bought an excellent balance charger from Overlander, Lipo Battery Balance Charger Overlander RC-8S Pro | Overlander...

I have a Currie drive, and am just beginning to use it. Not too convinced, with all the weight being on my rear wheel... I'm going to put it up for sale, soon, at what should be a very attractive price.