Hi,
I have an issue with a Panda ebike kit. It's around 11 months old, and was getting used 3 times a week in that time, roughly doing 300 miles a month.
After a good douse of rain the hub motor stopped running.
the kit has 2 brake sensors, an LCD display, a PAS sensor (King Meter) and throttle.
It's a 36V 250W setup.
I tried disconnecting the brake sensors and throttle, then just pedalling normally, and I get no power. I've also fiddled with the PAS sensor (how close to the adjacent part) and that makes no difference.
I also tried just having the throttle attached, with brakes and PAS disconnected, again no power.
(The throttle used to work, however you'd need to be pedalling first before it became active)
Do you think my controller is broken? It's a KT36ZWSR-F19N (max current 15A)
Or maybe there's a fault with the LCD? The display is all showing correctly.
Any tips on further fault finding?
I have an issue with a Panda ebike kit. It's around 11 months old, and was getting used 3 times a week in that time, roughly doing 300 miles a month.
After a good douse of rain the hub motor stopped running.
the kit has 2 brake sensors, an LCD display, a PAS sensor (King Meter) and throttle.
It's a 36V 250W setup.
I tried disconnecting the brake sensors and throttle, then just pedalling normally, and I get no power. I've also fiddled with the PAS sensor (how close to the adjacent part) and that makes no difference.
I also tried just having the throttle attached, with brakes and PAS disconnected, again no power.
(The throttle used to work, however you'd need to be pedalling first before it became active)
Do you think my controller is broken? It's a KT36ZWSR-F19N (max current 15A)
Or maybe there's a fault with the LCD? The display is all showing correctly.
Any tips on further fault finding?