Help! Compatible controller for a 5 pin torque sensor

[graresf]

First of all, apologies, I feel that this question has been asked again and again, and I have yet to find an answer for myself, despite going through a lot of information on this forum and outside of it.
My technical skills are mediocre regarding the matter, my passion is 10/10, but I don't have the time (work + toddler) to go through this rabbit hole as much as I'd want to.

Problem: busted controller.
Bike: ampler stout.
motor: AKM100SX (9pins)
battery: 48V 7Ah.
torque pedal sensor: NCTE sbbrt-120l-1-8-708

So I'm looking for a controller replacement, I've received a quote of 350E + transportation from Ampler, but I'm looking to pay at most half of that, reason being, I could already fix the bike with these:

KT Controller
https://www.aliexpress.com/item/1005004514604428.html?spm=a2g0o.cart.0.0.75bc38da5abAkb&mp=1

KT Display
https://www.aliexpress.com/item/1005005417141995.html?spm=a2g0o.cart.0.0.75bc38da5abAkb&mp=1

PAS sensor
https://www.aliexpress.com/item/1005003812987021.html?

So everything for less than 100E.

That would be the easiest option. The issue is, I have this nice piece of torque sensor,


and I would like to use it, but can't find the correct controller for it.

What I'm looking for should be something close to plug-and-play, if anything like that exists.
No throttle needed, using the bike to get my kid to the daycare, no need for "accidental" throttle push .

Thanks!