I'm throwing out an old question I posted more than a year ago in case some new ideas come to the fore.
Electric motor keeps disengaging after a few turns of the pedal. If you free wheel for a few seconds or switch the power off and on it re- engages. It's a voilamart 36 volt front wheel hub. It did have a wheel drop out couple of years ago which stopped the motor from working, buts now been fixed with the great help of some people here. It wasn't happening immediately after the repair. I've cleaned the magnetic contacts on the disc and I've readjusted the pedal sensor but it doesn't solve it. I checked all wiring for continuity in the process of repairing the motor. Guess it's a hard one to answer but I'm thinking how to open the controller and clean up everything inside I wonder whether it it had something happened to it when I had the wheel drop out. Any other thoughts our ideas would be appreciated
Electric motor keeps disengaging after a few turns of the pedal. If you free wheel for a few seconds or switch the power off and on it re- engages. It's a voilamart 36 volt front wheel hub. It did have a wheel drop out couple of years ago which stopped the motor from working, buts now been fixed with the great help of some people here. It wasn't happening immediately after the repair. I've cleaned the magnetic contacts on the disc and I've readjusted the pedal sensor but it doesn't solve it. I checked all wiring for continuity in the process of repairing the motor. Guess it's a hard one to answer but I'm thinking how to open the controller and clean up everything inside I wonder whether it it had something happened to it when I had the wheel drop out. Any other thoughts our ideas would be appreciated