I had a crash about a month ago. Had to get a new display, new brake lever and a disk rotor sorted out.
Finally managed to get the bike back from the shop yesterday. Tested it today and the motor was working fine in all modes. After about 10-15 seconds, the mode starts flashing and the motor cuts out. If I turn the bike off and on the motor and all the modes start working again for again, 10-15 seconds.
There’s no visible damage to the motor housing. Something has gone wrong because it wasn’t like this before the crash.
The motor is a Yamaha PW motor.
Finally managed to get the bike back from the shop yesterday. Tested it today and the motor was working fine in all modes. After about 10-15 seconds, the mode starts flashing and the motor cuts out. If I turn the bike off and on the motor and all the modes start working again for again, 10-15 seconds.
There’s no visible damage to the motor housing. Something has gone wrong because it wasn’t like this before the crash.
The motor is a Yamaha PW motor.
Last edited: