Hi,
I have a woosh rio. This morning for some reason the speed shown on the LCD is a few mph lower than it should be. I've had the bike 11 months and commute daily, so I know what speeds I usually ride at on each particular section of the commute and on the downhills it was up to 10mph lower than usual (usually 29/30 mph on the steep downhills but was showing 20). No wind this morning, so I'm confident that it's not a headwind issue. The speeds were consistently a few miles lower all the way to work.
I've checked the wheel diameter setting and still showing 26".
At first I thought it might be a magnet that had moved or spun round but had a look and can't see one, so I'm guessing the sensor is in the hub?
Any ideas as to what the issue might be?
Thanks.
I have a woosh rio. This morning for some reason the speed shown on the LCD is a few mph lower than it should be. I've had the bike 11 months and commute daily, so I know what speeds I usually ride at on each particular section of the commute and on the downhills it was up to 10mph lower than usual (usually 29/30 mph on the steep downhills but was showing 20). No wind this morning, so I'm confident that it's not a headwind issue. The speeds were consistently a few miles lower all the way to work.
I've checked the wheel diameter setting and still showing 26".
At first I thought it might be a magnet that had moved or spun round but had a look and can't see one, so I'm guessing the sensor is in the hub?
Any ideas as to what the issue might be?
Thanks.