Juicy Bike Conversion kit to a Trek 7300fx after lucky escape from tamworth cowboys

[b0331e]

Juicy Bike Kit arrived yesterday many thanks Buxum Bob.
Only problem encountered are my bikes front suspension forks screw holes, are slightly to small for the front wheeled hub motor axle to slot into. I could bang them in but I would have a permanent wheel stuck on the bike never to come off so i thought it best I give the installation to experts....... E bikes direct (battersea) will be installing the kit for me, along with some small extras.

below is the bike PRE-KIT

 

[Scottyf]

A snug fit for hubs is never a bad thing in my eyes.

Good look with the conversion!

 

[Deleted member 4366]

Its normal to have to file the forks a bit to fit a front motor, or a lot if it's a big motor like a Bafang BPM. Sometimes you have to file down the disc caliper carrier a lot as well.

 

[oigoi]

Nice bike will make a good ebike be interesting to hear how the juicy kit performs