Hi All,
I'm running a KT-LCD 3 and controller and use a magnet/hall effect sensor on the rear wheel to provide speed pulses for the speed display. I have noticed that sometimes the display drops to 0 MPH even though the bike is still going around 14 MPH.
I initially thought that maybe the magnet wasn't close enough to the sensor and I was getting intermittent speed pulses. But after a bit more observation I see that the display only drops to zero if I stop pedalling.
Has anyone else seen this before? Is there a setting I need to tweak or do you suspect a faulty controller?
Cheers,
Josh
I'm running a KT-LCD 3 and controller and use a magnet/hall effect sensor on the rear wheel to provide speed pulses for the speed display. I have noticed that sometimes the display drops to 0 MPH even though the bike is still going around 14 MPH.
I initially thought that maybe the magnet wasn't close enough to the sensor and I was getting intermittent speed pulses. But after a bit more observation I see that the display only drops to zero if I stop pedalling.
Has anyone else seen this before? Is there a setting I need to tweak or do you suspect a faulty controller?
Cheers,
Josh