Looking for a part ( screw )

mountainsport

Esteemed Pedelecer
Feb 6, 2012
1,419
298
Hi,

My padded vador cycle seat screw is worn so I'm not able to tighten properly which I think it is for the seat adjustment. I have no idea of the size, but it uses a allen key size crv6 whatever that means. Can anyone give me an idea where to buy one?

MS.
 

peerjay56

Esteemed Pedelecer
May 24, 2013
745
201
Nr Ingleton, N. Yorkshire
Hi,

My padded vador cycle seat screw is worn so I'm not able to tighten properly which I think it is for the seat adjustment. I have no idea of the size, but it uses a allen key size crv6 whatever that means. Can anyone give me an idea where to buy one?

MS.
Do you mean the screw which tightens the seat post into the frame, or one mounting the saddle to the post?

If the former, I couldn't locate one, and had to re-use the rusted original, with new nuts!
 

mountainsport

Esteemed Pedelecer
Feb 6, 2012
1,419
298
Do you mean the screw which tightens the seat post into the frame, or one mounting the saddle to the post?

If the former, I couldn't locate one, and had to re-use the rusted original, with new nuts!
First of all Phil it is a basic seat suspension post and I can only locate one main screw which is the one that mounts the saddle to the post. Does that help?

MS.
 

peerjay56

Esteemed Pedelecer
May 24, 2013
745
201
Nr Ingleton, N. Yorkshire
First of all Phil it is a basic seat suspension post and I can only locate one main screw which is the one that mounts the saddle to the post. Does that help?

MS.
OK MS:)
A different part to the one I was thinking of then. Could you post a photo of the screw? That might help someone to identify it for you.
 

mountainsport

Esteemed Pedelecer
Feb 6, 2012
1,419
298
OK MS:)
A different part to the one I was thinking of then. Could you post a photo of the screw? That might help someone to identify it for you.
Phil you are asking the impossible now, I need to pop out tomorrow and I will stop at my local bike shop.

MS. Thanks for your time Phil. I will let you know when I do it, which ive been putting off for some time now .
 

bilabonic

Esteemed Pedelecer
Feb 20, 2013
294
6
Do you mean bolt ? Not seen many screws on a bike.

They are all usually M5 or M6 thread, then just get the length you require.
 

johnc461165

Esteemed Pedelecer
Aug 19, 2011
546
22
WN6
Is it this screw, looks like a standard allen screw probably 6,8 or 10 mm thread, (info only)- a set screw has a full length thread a bolt is not threaded all the way to the head.

VADER SADDLE.jpg
 
Last edited: