pedal sensor

[mygrumpy001]

Hi All Need a new pedal sensor mine got caught in the chain ring which made a wright mess of it what I wont to know will any sensor work John

 

[OldBob1]

Hi John make and model of bike will help or a picture, maybe easier to replace both sensor and magnet ring, you will also need a crank puller.
Bob.

 

[Nealh]

Most sensors come with a magnet ring all should work as long as it is wired right, two types of sensor fitting adjustable sticky on ones which also are better being cable tied or a bracket one which is retained by the b/b retaining nut/ring.

 

[mygrumpy001]

Most sensors come with a magnet ring all should work as long as it is wired right, two types of sensor fitting adjustable sticky on ones which also are better being cable tied or a bracket one which is retained by the b/b retaining nut/ring.

Hi Neal There is one on the Bay got 8 magnets mine has 9 got a yellow plug mine has to i bought the kit off the Bay from Germany he wants £32 bit much so will it work John

 

[Nealh]

£32 you having a giraffe, how about this one for £14.


http://www.ebay.co.uk/itm/ELECTRIC-BIKE-E-BIKE-PEDAL-ASSIST-SENSOR-24V-36V-48V-waterproof-connector-/141803825251?hash=item21042aa863:g:-IMAAOSwI-BWIZ6U

 

[mygrumpy001]

£32 you having a giraffe, how about this one for £14.


http://www.ebay.co.uk/itm/ELECTRIC-BIKE-E-BIKE-PEDAL-ASSIST-SENSOR-24V-36V-48V-waterproof-connector-/141803825251?hash=item21042aa863:g:-IMAAOSwI-BWIZ6U

Hi Nealh I ordered that one hope it`s wired right John

 

[Nealh]

Hi Nealh I ordered that one hope it`s wired right John

You didn't say which bike you had. Wuxing make a lot of components which are fairly generic on Chinese branded/ sourced components. The yellow 3 pin connector should be good also looks to be a LH fitting so no need to get caught in the chain again but some will fit on either side.
Look on Pedalease's web site it may give you more info.

 

[mygrumpy001]

You didn't say which bike you had. Wuxing make a lot of components which are fairly generic on Chinese branded/ sourced components. The yellow 3 pin connector should be good also looks to be a LH fitting so no need to get caught in the chain again but some will fit on either side.
Look on Pedalease's web site it may give you more info.

Hi Nealh It`s a kit bought of the Bay off a German man are most of them weired rad black white will check out Wuxing Thanks for your help John

 

[Nealh]

Hi Nealh It`s a kit bought of the Bay off a German man are most of them weired rad black white will check out Wuxing Thanks for your help John

Red and Black are commonly used as 5v and GND so these should match to each other the 3rd can be any other colour and is the signal and so go together irrespective of their colour.