Hi all
I really hope that someone can help me. I'm building an eBike for my Dad and everything works except the PAS.
I checked the voltage and the Positive reads about 5v - with the signal cable also reading around 5v too (with the PAS disconnected). Should the signal cable not be nearer to zero ?
I tried disconnecting the signal cable from the connector block and connected the PAS. The signal cable coming back from the PAS was then fluctuating reading about 0.1v to -0.1v when I rotated the pedals.
So I don't know if I have a controller problem or a PAS problem - or the controller could have blown the PAS
Any info regarding voltage levels greatly received.
Thanks in advance
I really hope that someone can help me. I'm building an eBike for my Dad and everything works except the PAS.
I checked the voltage and the Positive reads about 5v - with the signal cable also reading around 5v too (with the PAS disconnected). Should the signal cable not be nearer to zero ?
I tried disconnecting the signal cable from the connector block and connected the PAS. The signal cable coming back from the PAS was then fluctuating reading about 0.1v to -0.1v when I rotated the pedals.
So I don't know if I have a controller problem or a PAS problem - or the controller could have blown the PAS
Any info regarding voltage levels greatly received.
Thanks in advance