Which tuning should I buy to get 25 km/h speed limit taken away completely?

[djbaaz]

Hi, I have Specialized Turbo Como 4.0 Low-Entry 2019;

https://www.specialized.com/dk/en/turbo-como-4-0-low-entry/p/159108
UI/REMOTE Custom 2.2" computer. LCD display, USB plug, stem mount w/ custom handlebar remote
BATTERY Specialized U1-460, On/Off button, state of charge display, 460Wh
CHARGER Custom Specialized 42V2A Charger w/ Rosenberger plug, AC power cord included
MOTOR Specialized 1.2E, custom Rx Street-tuned motor, 250W nominal
WIRING HARNESS Custom Specialized wiring harness

Which tuning should I buy to get 25 km/h speed limit taken away completely?

PS. no it's not illegal to drive with your electric bike 45 km per hour in Denmark and that's why I want to lift the top speed from 25 to 45km/h.

 

[wheeliepete]

Your bike has a new to market Specialized motor, I don't think anyone has developed a dongle for it yet.

 

[djbaaz]

damn ! I was thinking of this one; https://www.ebiketuning.com/manufacturer/badassbox/badassebikes-box-3-3-for-brose.html

 

[wheeliepete]

Worth e-mailing them to ask, this may work on your bike.I think your motor is a modified Brose.

https://www.ebiketuning.com/shop/peartune-specialized-vado.html

 

[Warwick]

If it works on your bike, it's the one to go for for simplicity's sake. I fitted one to my Ortler in a matter of 2 minutes.

 

[djbaaz]

Worth e-mailing them to ask, this may work on your bike.I think your motor is a modified Brose.

https://www.ebiketuning.com/shop/peartune-specialized-vado.html

I just Order of one I hope this works

 

[Steve Bowles]

Let us know what it's like to hit the pavement at 40mph.

 

[soundwave]

Let us know what it's like to hit the pavement at 40mph.

i doubt it as it wont have the gearing for that sort of speed on the flat.

 

[djbaaz]

i doubt it as it wont have the gearing for that sort of speed on the flat.

It's km/h and not miles

 

[soundwave]

It's km/h and not miles

it dont matter you will run out of gears unless you up the front chain ring

 

[anon4]

Let us know what it's like to hit the pavement at 40mph.

I reach that speed on the regular with the help of some big hills. If you taste the pavement either you or a motorist f'd up. That said with limitations removed it becomes more important to be aware of surroundings and safety check the bike, especially the brakes and points of contact. A loose stem or wheel could end in disaster

 

[djbaaz]

thanks for info.

I reach that speed on the regular with the help of some big hills. If you taste the pavement either you or a motorist f'd up. That said with limitations removed it becomes more important to be aware of surroundings and safety check the bike, especially the brakes and points of contact. A loose stem or wheel could end in disaster

True!

 

[djbaaz]

so guys, I got the tune in the mail today.
So i started follow as this pdf; http://www.peartune.com/peartune_brose_yamaha_bosch.pdf
But my motor setup dont look at this, Is it game over for me? See attachted photos.
How come there is no display cable connected?
I see 2xligts cable and one sensor cable but no display???
I mean, I have the stock display ------

Plz help...

 

[wheeliepete]

Did you e-mail ebiketuning to find out if it fitted your bike/motor before ordering?

 

[flecc]

it dont matter you will run out of gears unless you up the front chain ring

No, 45 kph would mean spinning about 95 cadence, fast on that sort of bike but not at all impossible.
.

 

[djbaaz]

Did you e-mail ebiketuning to find out if it fitted your bike/motor before ordering?

I did, and they send me this; see jpg file attached
Which one is it? I mean, I was thinking of following this youtube video;

but that is a wronge video?

hmmm, any idea?

 

[soundwave]

i dont think anyone on the forum has a brose motor that has one of those dongles.

 

[djbaaz]

i dont think anyone on the forum has a brose motor that has one of those dongles.

and ebike has the worst support ever.
Im thinking that the jpeg is the right one, becuase it looks like the motor that I have on my como,
but I dont understand the jpeg install. even the arrows dont make sense.

any ideas what they mean?

 

[soundwave]

pull the 5pin and 2pin connectors from the motor

plug the 5 pin and 2 pin connectors from the dongle to the motor.a-b

then reconnect the motor cables to the 5pin and 2 pin connectors on the dongle.

well thats what it looks like to me as the dongle needs to be in between the connections.

 

[djbaaz]

Doing it now