Wisper recondition

[bill1963]

Hello ,

Recently I bought two Wispers.

One 905 se and one 905 eco.

The se is in working condition and the eco possible has a an electrical problem.

So the first thing I tried to do is to switch the batteries.

I measured with polymeter and they both say 60.1 V

The working condition bike SE doesn't start with the ECO BATTERY the lambs on the bike.

Is this normal ?

There is no expirient wisper service in Greece so I want to learn to service the electrical system my self

Thank you very much in advance for your help.

B

 

[aaannndddyyy]

bill1963 has exceeded their stored private messages quota and can not accept further messages until they clear some space.
you need to clear your message box

I received the bicycle.

In the same time I received another wisper 905 se with charger.

The bicycle show the power lamps on but throtle doesn't move the wheel.

Is there any trick I must make to move the bike ?

It doesn't work like the other wisper .

Thank you



the switch on the left handle bar needs to be set in the 1 position for throtel and pedelec and 0 for pedelec only.

 

[bill1963]

Hello Andy did this with both batteries .

Electric motor doesn't move with eco battery lambs are on in the control.

With se battery (which works on the other wisper) doesn't start even the lambs in the right handlebar of the eco bike.

Thank you

Basil

 

[aaannndddyyy]

Hello Andy did this with both batteries .

Electric motor doesn't move with eco battery lambs are on in the control.

With se battery (which works on the other wisper) doesn't start even the lambs in the right handlebar of the eco bike.

Thank you

Basil

sent you a PM

 

[Mussels]

The battery has a fuse in it, you might want to get spares before you need them.
The mini fuses are a standard size but I can't remember what rating.

 

[bill1963]

Hello,

Thank you Andrew,

The fuse is burned and it was covered with aluminum foil. Fuses are in the must purchase list.
Does anyone have a wisper service manual ?

Thank you

Basil

 

[eddieo]

Hello,

Thank you Andrew,

The fuse is burned and it was covered with aluminum foil. Fuses are in the must purchase list.
Does anyone have a wisper service manual ?

Thank you

Basil

The manual can be downloaded from wisper website I think....a fuse that has gone and been covered in foil is not good, as you have lost the fail safe and it can of done more damage.

 

[aaannndddyyy]

Hello,

Thank you Andrew,

covered with aluminum foil.

Basil

which is a big NOno

 

[bill1963]

Hello,

Thank you

The manual is a user manual not a service manual.
Power on but
motor not working
1. Battery not connected position
2. Fused
3. Motor connection damaged
4. Handle bar control problem
1. Re install battery
2. Replace fuse
3. Call service
4. Call service

Call service not available in my country,lol

 

[eddieo]

OK! In that case email Norman at Wisper service he is very knowledgeable

 

[Wisper Bikes]

Norman

Hi Bill

Yes best to write to Norman with a detailed account of the problems, he will talk you through all the tests. Our full service manual will be ready by mid summer.

All the best

David

 

[bill1963]

Hello,

I have already sent an email to service@wisperbikes.com

and waiting for help.

Thank you

B

 

[Wisper Bikes]

Hi Bill

I am checking out Support@wisperbikes.com now as it is not one I use. If there is a delay try the one for Norman at the bottom of this reply.

All the best

David