Daweed

Hello, My battery mount cracked and battery got under my bicycle while I was cycling. Before it happen fully charged battery was showing: 41.4V and now after accident it only shows 40.4V. Basically I have a new casing for my battery but I need to find a place where it can be fixed (I guess spot weld on one cell gave up) and cells checked and replace if needed. I have seen many people mentioning Jimmy but I couldn't find him here. Can anyone recommend place I can take my battery to? Ideally London.

Hello. Well long story short is that my hub cracked around bearing so got it welded I but tensions in the spokes changed so I lost few of them. I took whole wheel apart to repaint the hub thinking that sourcing new spokes would be piece of cake. Ohhh how wrong I was. I've tried eBay and even got some but they were couple of mm too long and the J bend offset was too big as well (it was 4.5mm and I need 3mm). I'm getting really desperate now for having that wheel done. So my question is - can any one point me to the place where I can source right spokes without paying the earth? Or even better where I can take/send my hub and rim and get it done (just for reference is 156mm 12g [2.6mm] with 3mm bent). Ideally in South East England. Just want to get in the saddle again. Cheers.

I'm a new member here on this board but I've been using my bike already for 5 months. It's a 500w 36v conversion kit. I've done already 1300km and absolutely love it.

Thank you again. Just ordered one from eBay. Sadly battery is discharged so hopefully this charger will get here soon.

Thx for the clue. Just a question. Am i right thinking that any 42v 2a ebike charger would do?

Hello. Few days ago I've dropped my charger and coil inside got damaged beyond repair. Now I'm in need of a replacement charger but I'm not sure which one to get. For start my battery is that water bottle kind Lithium-Ion 36v 11Ah and has a coaxial power DC 5.5mm connector. I've been looking on e Bay and the there is planty of chargers out there but unfortunately with different connectors (like 3 pin). Assuming I will change connector plug can I use any 36v charger like one for lead batteries. Also thing I don't get is that some chargers are listed with battery capacity like 7ah or 20ah. If my battery is 11ah then which one would be better 7ah or 20ah ? Regards Dave