magoo

Brilliant, thanks for that. I’ll get ordering!

Yep for sure, lesson learnt

Hi Nealh, thanks for your reply. Yes, shorted the probes, feel so stupid but what’s done is done. So,yes getting 5v on red/black, blue and green also responding but yellow just staying at 5v no change when rotating the wheel. presume I’ve blown that one? what do you think my options are please? thanks

Hi, yes it is.

so this morning while looking at adding lights to my build with aKt36 controller, I successfully managed to fry it. I was using a multi meter at the time. See photo so now when I power up I get 03 info error. anyone know how much damage I’ve done and what the fix might be. feel a bit sick about it as I use the bike daily for my commute. Appreciate any help to resolve.

No problem hope you find something suitable

Are you in Ireland?

Converted Merida Urban Crossway 100, 52cm frame (suit 5'8" up to 6'4" rider) Bought bike new in 2016 from 360 cycles in Clontarf. Conversion: Motor Q128C-135mm 500W CST Rear Driving EBike Hub Motor Wheel - Voltage: 36V, RPM: 201 Battery: 48v,12ah Li-ion Battery 17A PSWPower sine wave controller Schwalbe puncture resistant tyres Suntour NCX Suspension saddle. A fantastic bike used for commuting and dropping the little ones to school.

Thanks d8veh, appreciate your advice on this again

Ah d8veh, I guessed you would be first on this!!! It’s for a pashley poppy, she loves the bike but finds it v heavy. I was thinking of this motor or bbs01 as it’s drum brakes. What do you think?

I’m jumping the gun here as I know I need to update my last build, and I will I promise. The next build is for my wife and a bit of a challenge which I’m looking forward to. So the question is has any one tried this... Q85 36V250W Roller Brake Front Driving Hub Motor

Finally all sorted and here is the result. Huge thank you to all who have put me on the road not only literally but started my knowledge on this really interesting topic. Now this has generated a whole new issue........my better half wants her bike converted, time for a new thread I think

Thanks all will give all those options a try

Hi guys, I knew I'd be back for help!!! Ok, got around to putting it all together yesterday but am having 2 issues, I presume they are related? 1. Readings on KT-LCD6 are all over the place speeds jumping all around, won't read a continuous speed. 2. the motor seems to 'pulse' if thats the right word for it, seems to give power then back off and then power again with no change in my pedelling? Any help greatly appreciated, i think i'm going to love this when i can get it running smoothly.

Apologies for not getting back sooner,anyhow, very excited and bit the bullet. Battery and motor have arrived, controller here tomorrow :-) I went with your recommendation d8veh, many thanks to all for your advice. I'm sure i'll be in touch during the build for more!!!!! Can't wait to get stuck in....