tushingham2

Yes you’re absolutely right another and the MPH is working fin, this is just on test in my workshop. Many thanks for your expertise and help certainly appreciated

Thanks i understand what you’re saying, This is a pedal sensor a large disc on the crank . The Bafang mid-drive electric conversion kits i fit they do have a magnet sensor on the rear wheel with magnet on one of the spoke. Some of their displays i have fitted are £100

Are saying to use this unit for only £4.44 if don’t fix MPH working on C500 in fact i do have one newer used that is if i can find it Many thanks Ron

I Know there are plenty of comics on facebook but failed to realise that they are on here too

I have been looking for some of these COMICAL less than a fiver display computers to top up my skip. Do not worry i will fix the problem Have a nice day

This interesting, I did wonder if is anything like that, shutting down happens on my other ebike’s after i have stopped say near to about a minute. But with this trike i have not stopped i am moving. But like you say. with no MPH recording it is thinking I have not moved, (very clever thinking on your part ) I have fitted a lot of these kits in 15 years. I am going to switch off the sleep mode. I now recall a stuttering down problem after a mile i had with one, must be eight years ago and that one i unplugged the battery then plugged it back in then okay another mile. Many thanks Ron Tushingham Electric Bikes UK

I have a Jorvik trike come in with a 9 pin electric conversion kit fitted not showing any error message but shuts down after about half a mile then i can power again okay, no reading of MPH and trip mileage working. Fitted a new display no different Any suggestions. It’s a nice little trike 20 inch wheels I did do a big service on 5 years ago and fitted a new battery

Very helpful info to make a note of thank you Do know where i can obtain the different connections fitted on controllers be handy to have some spares

It’s for a client so it looks like a new controller Have placed one on order but can never find one with correct matching connections

It’s for a client so it looks like a new controller Have placed one on order but can never find one with correct matching connections

error 10 Usually controller, just making up connections to fit new controller

I have just fitted a different and better display no flickering and staying on but error 10 message

Yes i have unplugged and refitted and controller connections are. good thank you

swifty liberte folding electric bike not working. Display comes on lights flicker and goes off. Would it be a fault sent to the display from the controller? or maybe display failure, faulty. any help appreciated Many thanks

I have an electric scooter KQI2 come in the workshop electric problem, the charger very old seems to plug in either way, i have ordered a new charger but don’t want to plug in wrong polarity major strip down to get access to the charger connection. no end of screws on the running board multimeter not getting a reading power from battery via charger socket any help please