Jayjay1997

Toy earlier post a friend sent this that the Carrera might not be color for color after the pin connector but do I have to solder each try or can I twist for a while ,while I test

Hi I have a problem with a 2021 vengance I first had a issue with the back pin connector a wire was snapped and I'd sort of jammed it back into the pin after stripping carefully the half of the junction I could tell was bent crooked the bike was on when the problem occured (general vibration but when I jammed the hall sensor wire into the snapped ish pin would work fine ) so I decided to try splice the whole pin connector now the controller will not recognise the wheel and now a new problem arrived the pas sensor will ground the whole bike regardless of wheel being connected can a e00 mean there's a issue from the sensor through to the wheel and the issue is not the controller itself and just the oath from the sensor to the wheel sorry if it's a bit choppy this description