Kierandgaf
Members
-
Joined
-
Last visited
Everything posted by Kierandgaf
-
Let’s say in the future I want to switch back to basic wheel which is quick release will it work still?
-
Round file or flat one
-
With the torque arm can I use multiple washers or just one. Thick one to extend then put torque arm o. Afterwards
-
14mm
-
I’ve taken it off to get a better picture of the gapping
-
Torque arm is installed on the brake side
-
And another ine
-
Here is another
-
Here is a better picture
-
Hello I’m currently facing issue with the motor and drop out it not sitting flush it the exact same on both sides any ideas what I can do
-
Hi my ebike motor axel is risen when tightened the non drive side. Do you think I may need more spacers
-
Hello I have Famex ride 2000w ebike kit and I’m hardly getting any speed I have sw900 display but this display has 20P settings compared to my other display which has 16 any ideas and how to set up
-
On the display
-
My 2000w motor is not doing 2000w doing 900w
-
Mine says on my display 100 but I’ll try 50
-
Well it rated for 50ah continuous discharge
-
The battery has 50ah discharge
-
My controller has 40ah+05V would I set the ah to on display to 35?
-
Majority have 16 settings and mine has 20
-
Is this one specific for my one which has 20 different settings
-
Hardly getting right amount of speed just getting under 29MPH
-
Hello I have Famex ride 2000w ebike kit and I’m hardly getting any speed I have sw900 display but this display has 21P settings compared to my other display which has 16 any ideas and how to set up
-
Hello I have 48V TSDZ2 and 48V battery and wondering what should I change my settings to that won’t affect the health of the motor or the battery. Any ideas so I don’t burn anything
-
I got 4.7v im Guessing that okay and that im on the old one which is flashable
-
Does the battery have to be plugged in?
