bh91

Unfortunately no. Swapped for Bafang 1kW

Also I can 3D print needed clamp Using Carbon fiber PETG. Parts ordered. Time to wait. Thanks guys!

Thanks for info. I will choose between KT-LCD3 and KT-LCD5. Cheers!

Yes it's true. Everything looked simple and I thought that I would succeed the first time without the help of the forum Thanks for the answer. Following this lead, can I also use KT LCD4 or KT LCD5? A slightly smaller form would be better for me Thanks!

Hi Guys! I am newbie in e-bike topics. I bought a Muddyfox Electric Avenue to see how it works and I'm blown away! https://www.evanscycles.com/brand/muddyfox/electric-avenue-hybrid-bike-700516 I have on board such a simple LED driver: 24/36/48V LED KT 880 Display Control Panel Electric Bike Bicycle Accessories New | eBay Of course, I started messing around with modifications to have more goodies And mainly I wanted to add thumb throttle. I was suggested by the fact that the yellow plug is available and I bought the appropriate thumb throttle module. After connecting, however, an error pops up (all LEDs responsible for showing power are blinking) PAS is not active in this state. I thought maybe this LED driver doesn't accept this form, so I wanted to try with S866. I bought it and after connecting it I had a problem with communication. After reading the forum, I solved all problems with Errors. For me, the parameter P20 0000 did not give a reaction. Only after changing to P20 0001 anything happened, namely: The PAS on the first, third and fifth stages started the motor, but from the sound I believe it was 6km/h mode on each stage of the PAS. After connecting the thumb throttle, there was no error, but nothing happened either. Motor didn't even start. In addition, the speedometer does not show any reading Can anything be done about it? Or driver in frame musst be replaced? I don't want to disassemble all the electronics so as not to break anything Thumb throttle would be handy, my area is quite steep and I only have one gear. Sometimes starting is very tedious. Possibly, an additional derailleur (even one) to start would help. But the hub has a narrow mount (looks like a cassette spline) If nothing can be done - this information will also be helpful! Thanks and good weather everyone