ovt

I have the L6 display with throttle and i have already used that code to derestrict the ebike and the top speed reached is about 39-42kph on flat.The ebike was bought from France.So from the display i think i can adjust almost all parameters and I understood that when you derestrict the ebike the controller outputs is 22amp. So 22amp x 48v=1056W peak power. The only problem I have and would like to solve is the lagging when i use pedal assist.You said you can fix that without changing the controller. I also saw that tuning chip from Germany where it is said that you can have a higher acceleration, but firstly, it is much too expensive, secondly, from what I have read, it does not work with the L6 display, which is already an unlocked display.

Hi.I have an ebike with das-kit CT5-i5 controller, L6 display unlocked, I used the code 8088 for derestrict and the top speed that i can reach is 45km/h. The engine is an X15R 11AH1449, and I have a 48v 21Ah battery. The only problem that i have is the delay when I use pedal assist or the throttle. When I use pedal assist the delay is very annoying when I enter a roundabout and then I have to go up a hill, if you are on a lower gear it is quite difficult to leave the spot. This is the only inconvenience which i want to solve it, the lagging.