November 20, 201411 yr My new PAS sensor has arrived - it's by King-Meter.com and it appears to have a male 3-pin connector - I think (but am not sure) that the XiongDa controller has a different connector. What do you reckon?
November 27, 201411 yr Author Anybody any clue on the wiring of the PAS sensor loom from the XiongDa controller? Black, Brown and Yellow on the loom, but black, blue and red on the replacement PAS from King-meter.com
November 27, 201411 yr can you post a picture? usually, black to black (0V), blue to yellow and brown to red but a picture would help to confirm it.
November 27, 201411 yr Author It's not going to blow up either way, I guess. Just want to get back on!
November 27, 201411 yr Author Bit of a catastrophe, this. Trex, do you think Woosh would have a PAS compatible with the XiongDa 2 speed? Desperate to get back on the road.
November 27, 201411 yr You can try. Emal andy@wooshbikes.co.uk a picture of the old pedelec sensor and the connector, he'll find you one that would fit. Edited November 27, 201411 yr by trex
December 1, 201411 yr Can you post a picture of new and old sensors, I may have some sensors kicking around or at least give you a clue on wiring it.
December 2, 201411 yr Author http://king-meter.com/upload/images/1405495823.jpg is the new sensor and magnet-wheel
December 2, 201411 yr this sensor must be fitted to the chain side to work. Mine is the same and is fitted on the left NOT on the chainwheel side. There is an installation arrow on the magnet disc. http://i109.photobucket.com/albums/n50/kinninviekid/e-bikes/P1020202_zpsafe11835.jpg
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.