August 12, 20196 yr The screws on my bike are Phillips style cross heads made from quite a soft steel that are starting to show signs of corrosion. Think I'm going to have to drill, retap and replace with some decent screws.
August 12, 20196 yr ahhh been there, i have used a dremmel sometimes and carefully made them Slotted pan.
March 30, 20206 yr p.s. with the C2 controller you need a dealer card to get into the menus, from there you can edit the same settings to make the bike go faster. For anyone thats interested: C2 controller, hold + and - to get into general settings. from there hold the mode button and - to get into menu 1 (you need a dealer card) where you can change the limit speed return to the general settings then press mode and + to get into menu 2 (again need a dealer card) where you can turn off the speed at which pedal assist cuts out (should be set at the same speed as limit speed to avoid any conflict with the controller) Hi late to the party I know , is it possible to buy the dealer card anywhere? great info and wouldn't mind upping to 20 if possible but don't know any dealers so any advice would be appreciated . Thanks.
October 5, 20223 yr Hi late to the party I know , is it possible to buy the dealer card anywhere? great info and wouldn't mind upping to 20 if possible but don't know any dealers so any advice would be appreciated . Thanks. Very late to the party , but would like to know the same
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.