October 24, 20232 yr I just recently changed my Swytch kit controller to KT 22A Controller Kit that I ordered off Amazon, and since it was difficult to find information on the correct settings for the new controller, I thought I would share them here. I bought a complete KT kit and replaced all the Swytch components other than the hub, it's really the only way to make everything work properly. This is the battery replacement that I used as well https://www.amazon.com/gp/product/B089NRZMWK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 It doesn't matter which KT Display you use, the options would be the same. Important info for Swytch hub: There is a 250-watt and 500-watt hub, but I believe the settings for both are the same. The hub uses 6:1 ratio with 16 magnets in it. (To determine P1) It has 1 magnet for the pulse signal (For P2) The rest of the settings are attached, but are my setting preferences, where applicable. KT Settings for Bike Computer.pdf Edited October 24, 20232 yr by TBoy1
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.