November 17, 20241 yr Bafang 250w motor kit - UK legal Large capacity 48v battery 17.5Ah - 12 INR 18/65-5. Model BT C01.750.UC Battery power - 750Wh 250w Motor already laced in a 26inch rear wheel Battery rack carrier with integrated controller housing Display and cables included keys for the battery Battery charger included This kit is great for converting any bike into a UK-legal e-bike for a first-timer. BB torque/speed sensor is not included in this kit £250 ono
November 18, 20241 yr Hi Nikki is this kit new or used is it all Bafang Brand including the battery ? is the rear wheel Cassette ? Sorry I can not see the photos to well and when I enlarge them they go blurry. could you e mail me the pictures to bazautos@gmail.com I am interested in the kit for my Giant Anthem X full Suspension bike so may need advise on which bottom bracket or PAS will work if we buy the kit . Any of my bits on here you would want to PX for ? Cheers Baz
November 18, 20241 yr Author Hi Baz The kit is of a trike; I think the whole system is about a year old. So used, but very limited miles on the motor and battery The rear wheel is a cassette It's a full Bafang system, yes, including the battery. Nothing for PX. Just want rid of the system a a whole. The Bafang BB cadence/speed sensor will be fine for the bike; obviously, it depends on the size of your Bike BB. I will see if I can get some new photos for you Rgds Nic
November 18, 20241 yr Thanks I am interested just need to sell some of my bits to pay for it . my wife wants to fit it on this see attached . what do you think for a fit ?
November 18, 20241 yr Author It will run on any 26-inch bike, to be honest. Just need to get the correct cable out of the BB sensor Hereford
November 19, 20241 yr Hi Nikkj I have built a few bikes now not concerned with making the e spec work. As its a full suspension bike it’s the fitting of the other none e components that I have concerns about . And not being able to put the bike back to original condition. Do you mind if I post my plans on here and get some opinions as to any potential problems I may encounter? As it’s for my wife I just want to make sure it’s a 250W motor not a bigger one with stickers on it . If it was for me I would not worry about it this is what I use on my 350W motor but for her it has to be by the book. I could do with better photos e mailed pls. Cheers Baz
November 19, 20241 yr Author Hi Baz Put up your plans, and I will take a look. You can always turn the bike back to its original state. You don't need to cut or manufacture parts to fit. It's a kit; just connect it up and power up, and that's it. It's a 100% legal 250w motor; the battery has more capacity as this kit was removed from a disabled trike system. So, there are no stickers involved. It is the controller that controls the power anyway, not the motor. Regards Nic
November 20, 20241 yr Nikki Sorry we will not be buying the kit at present. I bought a Giant recently from a charity now they have just agreed to give me the battery and charger so no budget at the moment until I sell it. good luck with your sale . cheers Baz
December 6, 20241 yr Hi, would it work with a torque sensor? What is the motor model? Can it fit disk brakes? Apologies if the informationnis in the photos but they are fairly low resolution and can't tell. Would you consider posting the kit? Thanks
December 6, 20241 yr Hi, would it work with a torque sensor? What is the motor model? Can it fit disk brakes? Apologies if the informationnis in the photos but they are fairly low resolution and can't tell. Would you consider posting the kit? Thanks I think you need a matching torque sensor, controller and display (I had one from Woosh) that has a connection to the motor from the controller
December 7, 20241 yr Author Hi, would it work with a torque sensor? What is the motor model? Can it fit disk brakes? Apologies if the informationnis in the photos but they are fairly low resolution and can't tell. Would you consider posting the kit? Thanks Hi Chris You will need a Bafang PAS or something similar to run the motor. It comes with a display. I will get some better images and upload for you. I would need to find out cost for shipping as its pretty large and heavy
December 7, 20241 yr Author Hi Chris You will need a Bafang PAS or something similar to run the motor. It comes with a display. I will get some better images and upload for you. I would need to find out cost for shipping as its pretty large and heavy
December 7, 20241 yr Author Hi, would it work with a torque sensor? What is the motor model? Can it fit disk brakes? Apologies if the informationnis in the photos but they are fairly low resolution and can't tell. Would you consider posting the kit? Thanks Yes Chris, you can attach a disc rotor
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.