Hi folks, found the site whilst researching a fault with bafangs m200, the motor is very low mileage but when pushed it losses power for a few seconds then returns to no set pattern ,usually on higher power setting but not always.
the battery rated at 36 volts charges up to 41.7 then drops to 36 volt when nearly empty, i believe a firmware update may help but cant find a shop that can do it.
cheers chip
the battery rated at 36 volts charges up to 41.7 then drops to 36 volt when nearly empty, i believe a firmware update may help but cant find a shop that can do it.
cheers chip